Eric Boulden

• Worked on board DPII DSV CCC Pioneer with client
• NPCC/ZADCO
• Jobs involved Cable laying and all ancilliary diving operations.

• Worked with Client OXY on board DP II Vessel "CCC Pioneer"
• Jobs involved Air & Sat Diving - Sleeper & Riser clamps installation , Tie-Ins and Spool installation .
• Reviewed all emergency procedures before each dive and followed safety protocols to protect team members.

Worked on Heavy Lift Ship DEHE for client Saipem/Qatargas

Job involved installation and removal of auxilliary lift bags to enable a surface pipeline tie-in.

• Reviewed plans and inspected ongoing progress to keep work in line with project goals.

Mobilize and audit full dive spread onshore in Qatargas base for EPCOL shorepull operations.

• Checked and maintained diving equipment such as helmets, air tanks or gauges.
• Reviewed all emergency procedures before each dive and followed safety protocols to protect team members.

• Worked on board CCC PIONEER , Client: NPCC
• Project involving Air Diving Operations for Flexible Pipe lay, cable lay, spool works etc

• Worked on board NPCC DLS 4200 for client NPCC/ARAMCO
• Project involving Air Diving Operations for Jacket installation and Boat Landing Installations
• Reviewed plans and inspected ongoing construction to keep work in line with project goals.
• Supervised and trained other divers in performance of essential functions and duties of position.

• Worked on board DLB 750 with client NPCC/QG II
• Jobs involved pipelaying and shore pull.

• Worked on board Mubarak Carrier for Client: SAIPEM/ARAMCO
• Job involved burning on manifolds to allow new 16 inch spools to tie in to new 42 inch pipeline.
• Metrology to fabricate spools and then Tie in 16 inch to 42 inch pipelines x 6 times.
• 12 inch visibility at this site

Worked onboard Castoro II for client Saipem/Aramco.

Job involved pipeline and sleeper installation.

• Monitored job progress and performance of employees or contractors to complete projects prior to deadlines.

• Worked on board QMS ACHIEVER , Client :
• Saipem/Aramco
• Project involving Air Diving for Platform Demolition

Worked onboard Jack-up rig Whale Shark for client Saipem/Aramco.

Riser and J-tube installation then on to jacket demolition.

Use of broco burning, diamond cutter saw and airlifting for mudline access.

• Worked on board DPII DSV "BOURBON TRIESTE" for client SAIPEM/ARAMCO KSA
• Job involved shifting flexible pipelines to manifolds and tie-ins.
• Use of lift bags, dead mans anchors for shifting p/lines then hydratight jacks for tie-ins.

• Worked on board Wei Li Jack Up Barge for Client : SAIPEM/ARAMCO KSA
• Job involved Jacket & Pipeline Demolition activities ie:
• Broco burning, air lifting , diamond saw cutting machine, hydraulic pipeline shear cutter.

• Worked on board King Fish Jack Up Barge for Client : SAIPEM/ARAMCO KSA
• Job involved Jacket & Pipeline Demolition activities such as broco burning, airlifting for access for diamond cutter machine. hydraulic pipeline shear cutter.

• Worked onboard Jack-up rig "Kingfish" for client Saipem/Aramco.
• Job involved jacket and pipeline demolition activities.
• Broco burning of conductor guide frames, airlifting around platform legs, placement of diamond cutting machine on all accessible members.
• Hydraulic pipeline cutting machine installation for cutting of redundant pipelines.

• Worked on board DLB 1600 , Client :VALENTINE /ADMA
• Job involved Jacket Installation, Riser Installation and Tie-ins, then pipe laying Operations

• Worked on board CCC MARITIME -2 fpr Client :DOLPHIN ENERGY QATAR
• Job involved Existing Pipeline Inspection campaign 2015
• Managed time efficiently in order to complete all tasks within deadlines.

• Worked on board CCC MARITIME-2 for Client NPCC/ZADCO
• Project involving Installation of Subsea Pipelines, Cables, and Offshore Structures at Brownfield (EPC-1) at UZ750 field

• Worked on board DPII DSV Stanford Eagle for Total/QP in QATAR
• Job involved platform, cables and pipelines survey and inspection.

• On board CCC Maritime-2 for Client ADMA
• Project involving operations for Free span correction & grout bags installations.

• Worked onboard Zakher Delmon for client ADOC
• Air diving operations for submarine cables ,Laying, Testing & Commissioning and J-Tubes & Clamps Installations at Mubarrez oil field

• Worked on board DP II Vessel Adams Aquanaut
• Project involving Marine, ROV & Air Diving Services for
• Pre-Engineering Survey, Installation of J-Tubes and Power Cables .

• Worked on board DP II Vessel Adams Aquanaut
• Project involving Marine, Air & ROV spread services for Installation of
• Submarine Cables at Idd El Shargi Field Qatar.

• Worked on board DP II Vessel Zakher Pelican
• Project involving Air diving Operations for Grout Bag Installation

• Worked onboard Zakher Pelican for client ADMA
• Job involved extensive grouting campaign.

Worked on DPII DSV "Maritime 1" for client Oxy.

Job involved installation and repair of sub-sea cables.

• Worked onboard DPII DSV "Maritime 1" for client Total ABK
• Job involved 10 inch pipeline repair,

• Worked on board DPII Vessel CCC Pioneer for client NPCC/ZADCO
• Project involving Engineering, procurement Construction & Commissioning (EPC) works for Satah Full Field Development project.

• Worked on board DLB 1000 with client NPCC/ADMA
• Jobs involved Pipeline demolition, riser clamp removal, cleaning and re-installation of riser clamps.
• Pipeline weightcoat removal, broco cutting of pipeline,
• Routine use of hydraulic tools.
• Reviewed all emergency procedures before each dive and followed safety protocols to protect team members.

• Worked onboard DPII DSV "CCC PIONEER" for client Saudi Aramco.
• Job involved airlifting of sand on a buried 54 inch gas pipeline and installing a saddle type grout mattress every 10 meters as proscribed pipeline stabilization.
• Reviewed all emergency procedures before each dive and followed safety protocols to protect team members.

• Worked onboard DPII DSV "CCC PIONEER" for client Occidental Petroleum Qatar.
• Jobs involved sub-sea inspection of platforms and pipelines.

• Worked onboard SEP-150 for client NPCC/ADMA
• Installation of 4 x Boat Landings
• Installation of 4 x Caissons

• Worded on board DPII DSV "CCC PIONEER" for client NPCC/ZADCO
• Job involved partial replacement of 12" oil pipeline from PC33 to ZCC including smart flange installation, spool installation and tie-ins.
• Also pipeline tie down to sleepers.
• Liaised between field engineers and divers to comprehend construction drawings and specifications.

• Worked on board Topaz Salalah with client Maersk
• Jobs involved all aspects of SPM inspection ie:GVI, CVI , weld inspection, anode depletion. chain angles, chain wear, photography, video inspection, flange integrity, valve operation, Chinese lantern configuration etc.
• Reviewed all emergency procedures before each dive and followed safety protocols to protect team members.

• Worked onboard DPII DSV "CCC PIONEER" with client MOS/ADMA.
• Jobs involved grouting and freespan correction.

• Worked on board DPII DSV "CCC PIONEER"with client NPCC/ZADCO
• Jobs involved Shore Crossing and Jacket face surveys for riser installation.

• Worked on board SEP-250 with client NPCC/ADMA
• Jobs involved jacket installation, 42 inch riser installation , j-tube installation, 3 x 60 meter 42 inch spool installations and all relevant tie-ins.
• Liaised between field engineers and divers to comprehend technical drawings and specifications.
• Reports of progress to client and base managers.

• Worked on board DP DSV CCC PIONEER with client NPCC/ADMA
• Jobs involved Sleeper Installation. Sleeper tie-downs and freespan rectification.

• Worked onboard DLB-1000 with client NPCC/ZADCO
• Jobs involved Riser clamps and riser Installations.
• Liaised between field engineers and divers to align construction projects with drawings and specifications.

• Worked on board DPII DSV "CCC PIONEER" for client Oxy
• Jobs involved spool installation and tie-ins.
• Reviewed all emergency procedures before each dive and followed safety protocols to protect team members.

• Worked onboard SEP-250 for client NPCC/ADMA
• Jobs involved sleeper installation and all ancilliary diving operations.
• Strengthened team operations by refocusing training, optimizing performance and maximizing efficiency.

• Worked on board DLB-1000 with client NPCC/ADMA
• Jobs involved Sleeper Installation and all ancilliary diving operations.

• Worked onboard HLS-2000 for client NPCC/MAERSK
• Jobs involved jacket installation and all ancilliary diving operations.

• Worked on board DLB-1000 with client NPCC/ZADCO
• Jobs involved pipeline laying operations and diving support.
• Reviewed all emergency procedures before each dive and followed safety protocols to protect team members.

• Worked onboard DLB-1000 with client NPCC/GASCO
• Jobs involved 30 inch pipelay and shorepull operations.

• Worked on board PLB-648 with client NPCC/MOQ
• Jobs involved Pipelaying Operation.

• Worked onboard DPII DSV Gerimal with client Sime Darby/QP.
• Jobs involved spool installations and riser installations.

• Worked onboard HLS-2000 with client NPCC/ARAMCO
• Jobs involved Jacket installations and spool tie-ins.
• Reviewed all emergency procedures before each dive and followed safety protocols to protect team members.

• Worked onboard HLS-2000 with client NPCC/QGII.
• Job involved installation of EA Well Caissons and module.
• Maintained full understanding of dive plan and asked appropriate questions to iron out any confusing details, consistently upholding safety, efficiency and project standards.

• Worked on board Intercommander with client NPCC/QGII.
• Jobs involved freespan correction and grout mattresses.
• Established successful procedures for day-to-day operations and long-term planning.

Worked onboard Regina-250 with Client Valentine/ADMA

Job involved jacket face surveys, riser installaion, spool installation and tie-ins.

• Reviewed all emergency procedures before each dive and followed safety protocols to protect team members.

Worked onboard PLB-648 for client NPCC/MOQ

Job involved pipelaying campaign at Al Shaheen Block 5

• Oversaw daily operations at site, keeping team production moving at optimal pace.
• Trained divers in proper methods, equipment operation and safety procedures.

• Worked on DP DSV Garimal for client Sime Darby/QP.
• Job involved spool and riser installations.
• Liaised between field engineers and divers to align construction projects with drawings and specifications.

• Worked as Air Superintendent on board Lewek Chancellor for Client Sime Darby/QP
• Job involved installing riser clamps, setting risers and some grouting operations.

• Worked onboard SEP 150 for client NPCC/ADMA
• Job involved hook up works and replacement of boat fenders at CMP

• Worked onboard Marcap II for client Adma.
• Job involved Jacket face surveys for riser installation in Zakum field.

• Worked on board DLB-750 with client NPCC/QGII
• Jobs involved Pipelay Campaign and shore pull.
• Reviewed plans and inspected ongoing construction to keep work in line with project goals.

• Worked with client NPCC/MOQ onboard DLB-648
• Jobs involved a pipelay campaign
• Established successful procedures for day-to-day operations and long-term planning.

• Worked with client Maersk Oil at Sl Shaheen Field - Qatar
• Jobs involved inspection of SBM's/underbuoy hoses change out etc
• (Air Diving)

I worked as a CSWIP 3.1u and CSWIP 3.2u inspection diver for ADMA-OPCO client for all the ADMA assets in Zakum, Umm Shaif and Das Island.

I also was a DMT and Photo Technician at this time.

This was a steady rotation of 2 months on and 1 month off.

In 2006 I sat and passed my IMCA supervisors exam.

• Recommended changes to policies and procedures to maximize team efficiency and productivity.

• Jobs involved all aspects of commerical oil-field diving in several different countries and on many varied types of vessel including DSV's, floating production platforms, barges, semi-submersibles, drill rigs and platform operations
• Have been involved in some highly prestigious operations such as the Piper Alpha Toppling Project involving much underwater burning and laying of explosives.
• I was also involved in the cutting edge Ekofisk Barrier Project in the Norweigan Sector, North Sea and the Togi Tie -in project utiilizing Sub-Sea Offshore's "Otto Hyperbaric welding habitat".
• I was also involved in the "Rob Roy" and "Ivanhoe" Underwater Manifold tie-ins
• I worked for 2 years in the Bombay High oilfield for ONGC doing many varied tasks onboard the DSV Samudra Suraksha.
• I finished my time saturation diving in the North sea working on the "MSV Stadive" in the Shell basin working on all the Shell platforms and the Cormorant UMC manifold.

• Jobs involved mostly in well-head tie ins, pile-guide removal and anode installation but was also part of the team that installaed a 36 inch multi-riser on the Claymore platform for Occidental
• Also spent sometime on the MSV Tharos installing the bell cursors and doing her intial hull inspection.

• Worked on the Sante Fe Creek jetting barge.
• Worked on the MSV Uncle John with the Seahorse Hyperbaric Welding Habitat.
• Recommended for mixed gas training whle working for Comex

• Spent 6 months training in Taylors shop on building and running saturation systems including dive helmet maintenance, tube bending, regulators, and fittings and all aspects of saturation diving life support.
• Then spent 6 months on the Brown and Root Lay-Barge 297 as a life support technician.

• Had my first commercial dive to collect a burning rod bag from a diver decompressing at 90 ft salvaging a big jack-up rig that had fallen over in 270 ft
• Did a lot of hand jetting of small pipelines to bury them in the Gulf of Mexico
• Inspected underwater pipelines, pilings, buoy systems.
• Maintained and checked diving equipment for functionality and safety.