Santiago Dinglasan Jr

• Perform safety meeting prior to start of work.

• Responsible in stablishing new control points along the fabrication area.

• Set out position of temporary supports and layouts for the structure to the required tolerances.

• Check the alignment of skidway before the installation of the jacket legs.

• Monitor the alignments of legs and elevations of the jacket.

• Conduct Pre weld or fit up survey to ensure that the unit is acceptable before welding.

• Conduct assistance and survey during following operation roll-up of major structure, load-out and barge sea fastening, Crane route layout and structure levels during installation.

• Conduct main structure survey progressively during the work to monitor the global position, levels and interface dimensions.

• Performed interface survey to suit the exact needs for a particular projects and its required to carry out in early stage of the project.

• Carry out post-weld or as-built survey and submit to the engineering department for review and acceptance.

• Monitor the advance progress during load out of the jacket.

• Followed local, regional, and national guidelines for land surveying.
• Used Trimble and AutoCAD to create detailed maps from raw field data.
• Improved land survey accuracy by implementing advanced GPS and GIS technologies.
• Performed field calculations to complete assessments.

• Responsible for establishing survey control points along the pipeline routes and substations.

• Setting out and checking the location of columns, beams, walkways, and the temporary roads, lay down the.

• Performed field surveys using Topcon and Spectra total stations and GPS Trimble.

• Execute joint survey inspection with sub-contractor before pouring concrete of the pipe rack support.

• Set out the limit of right of way for the clearing operation.

• Set out the location of pipeline centerline for the excavation of the trench.

• As-built survey after lowering of pipeline.

• Set out the location of pipeline marker and cable marker.

• Generated legal descriptions, measurements, and geographical characteristics for an average of 10 legal descriptions monthly.

• Utilized GPS technology for efficient data collection, expediting the completion of fieldwork assignments.
• Entered legal descriptions, lot sizes and other data into online databases through AutoCAD, SurvCAD and CADD interfaces.
• Gathered, organized and modeled data for reports and presentations.
• Used Trimble and AutoCAD to create detailed maps from raw field data.
• Conducted topographic surveys to support land development projects, resulting in successful completion within deadlines.
• Maintained up-to-date knowledge of industry trends, attending professional conferences and participating in continuing education courses.
• Coordinated surveys to establish accurate legal boundaries for properties.
• Guided field crews on proper survey methods and techniques.

• Improved client satisfaction by providing clear and concise reports on property boundaries and potential issues.
• Contributed to environmental conservation efforts by accurately mapping natural habitats and assessing potential impacts of construction.
• Facilitated smoother construction processes by providing accurate, timely site measurements and land assessments.
• Conducted risk assessments for potential construction sites, identifying and mitigating factors that could impact project viability.
• Implemented new surveying technology to increase data collection efficiency, significantly reducing project turnaround times.
• Facilitated expansion of rural infrastructure by accurately mapping undeveloped land and providing data essential for project planning.
• Enhanced team productivity by developing a comprehensive database of historical survey data for easy access and reference.
• Skilled at working independently and collaboratively in a team environment.
• Proven ability to learn quickly and adapt to new situations.