Raul Tulagan

• Tested strength and quality of welds using tension, bend and penetration tests.
• Welded metal components in vertical, overhead and flat positions.
• Read and followed blueprints and weld diagrams.
• Shell ceramic welding with groove in flat, Vertical and horizontal positio
• Welded full joint penetration with groove using fcaw process 100% x-ray test
• welded fillet in flat,horizontal,vertical and overhead position
• Set up and operated shielded metal arc and gas metal arc welding equipment
• Inspected weld and check critical measurement to make specification.
• Chipped off excess weld slag and spatter using hand tool.
• Certified with SMAW, GMAW, FCAW (x-ray) and (bend)

• Welded full joint penetration with groove using fcaw, gmaw, smaw process 100% x-ray test.

• Welded fillet with flat,vertical,horizontal and overhead position.

• Familiar using calipers, tape measure and other standard measuring equipment.

• Maintain a safe work environment.

• Positive manner of performance, team player, good written and verbal communications skills.

• Welded shell welding, ceramic welding in flat, vertical, and horizontal position.

• Certified with SMAW, GMAW,FCAW (x-ray) and (bend)

• Reviewed work plans and blueprints to ascertain all requirements for project.
• Used appropriate safety measures and encouraged other team members to do same in effort to avoid job site injuries
• Clamped and tack-welded components to achieve desired configurations
• Welded beams and angle iron using Fluxcore, Stick (SMAW) and test plates using FCAw
• Used mirrors to weld in tight places and carbon arc to back gouge for full penetration.
• Performed any structural welding process assigned by my supervisor using Fcaw and stick welding processes.
• Attended daily safety meetings/trainings, required PPE and followed all safety regulations to ensure a safe worksite.
• certified with SMAW,FCAW
• Followed blueprints and instructions from supervisors to erect columns, beams and girders.
• Prepared welding equipment to perform advanced welding work.

• Prepared welding equipment to perform advanced welding work.
• Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
• Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
• Utilized blueprints and diagrams to compare finished products against design specifications.
• Avoided warping, shrinkage, and distortion by carefully controlling welding processes.
• Welded various connections with high-quality final results.
• Bolted, clamped and tack-welded parts to secure components prior to welding.
• Welded full joint penetration with groove using fcaw & smaw process
• Welded shell welding, ceramic welding in flat, vertical, and horizontal welding position.
• Profound knowledge of flux core and stick wedding.
• Amazing ability to produce leak proof welds.
• Outstanding ability to interpret blueprints and drawing.
• Wide experience in welding tank
• certified with SMAW, FCAW (x-ray) and (bend)