LEOVY MACATANGAY
Banaba Silangan, Batangas City, Batangas ,Philippines
Summary
Experienced industrial technician and maintenance inspector with international project experience in the oil and gas, petrochemical, gas-to-liquids (GTL), and power generation industries. Skilled in instrumentation installation, calibration, loop checking, troubleshooting, preventive maintenance, commissioning, and industrial inspection. Experienced in Leak Detection and Repair (LDAR), fugitive emissions monitoring, Corrosion Under Insulation (CUI) inspection, and Eddyfi Lyft inspection techniques.
Recently completed 160 hours of Blasting and Painting Training, covering surface preparation, blasting and painting equipment operation, coating identification, coating thickness measurement, paint mixing, and manual and airless spray application. Knowledgeable in workplace safety, equipment maintenance, quality standards, and industrial work procedures. Adaptable, safety-conscious, and committed to delivering quality work in demanding industrial environments.
Overview
1
1
Certification
11
11
years of professional experience
Work History
Maintenance Inspector
Aker Solutions
Al Khobar
07.2016 - 04.2018
- LDAR / Fugitive Emissions Inspector – Jubail Industrial Gases Factory
- Inspected plant components for leaks using P&IDs and relevant inspection references.
- Conducted fugitive emissions monitoring and identified leaking components.
- Tagged leaking flanges, instrument connections, and other components requiring corrective action.
- Eddyfi Lyft / Corrosion Under Insulation (CUI) Inspector – Saudi Aramco Ras Tanura and Berri Gas Plants
- Conducted inspections of insulated piping and components using Eddyfi Lyft technology.
- Performed Pulsed Eddy Current (PEC) measurements to assess wall thickness through insulation.
- Evaluated piping and vessel wall thickness against nominal thickness requirements.
- Inspected for corrosion under insulation, corrosion under coatings, corrosion under fireproofing, and other corrosion-related conditions.
Instrument Technician – Loop Testing
Samyoung Engineering & Construction Co. Ltd.
Yanbu
10.2014 - 04.2015
- Supported instrument loop testing, commissioning, and maintenance activities.
- Installed and calibrated smart electronic and pneumatic instruments.
- Performed preventive, predictive, corrective, breakdown, and shutdown maintenance.
- Interpreted P&IDs, loop diagrams, logic diagrams, and instrument hook-up drawings.
- Followed Permit-to-Work requirements and applicable plant safety procedures.
- Reported hazards and supported safe and reliable plant operation.
- Yanbu Marafiq Power Plant Project, Saudi Arabia
Instrument Technician
Daemyung Engineering & Construction Co. Ltd.
Billa Sur
05.2012 - 05.2014
- Installed, calibrated, maintained, and repaired industrial process instruments.
- Tested flow, level, pressure, and temperature transmitters, gauges, and switches.
- Performed cable pulling, continuity testing, cable termination, and junction-box connections.
- Conducted pre-commissioning, commissioning, loop checking, and instrument troubleshooting.
- Tested control valves and process instruments using electrical, electronic, and pneumatic testing devices.
- Performed Fire and Gas system loop checks and functional tests.
- Worked with Honeywell FOUNDATION Fieldbus and HART-based instrumentation systems, as applicable to the project.
- Verified instrument settings against engineering specifications and performed calibration and validation activities.
- Independent Power Plant Project, Billa Sur, Sultanate of Oman
Instrument Technician
Hyundai Heavy Industries Co. Ltd. – Shell Pearl GTL Project
Ras Laffan Industrial City
03.2010 - 09.2011
- Supported pre-commissioning, commissioning, and start-up activities.
- Installed, calibrated, and function-tested flow, level, pressure, and temperature instruments.
- Performed instrument cable continuity testing, termination, and loop checking.
- Conducted functional testing of Fire and Gas detection systems.
- Diagnosed and repaired process instrumentation faults.
- Verified instrument set points against engineering requirements.
- Participated in safety drills and reported unsafe conditions and plant hazards.
Primary Slitting Operator / Maintenance
Universal Robina Corporation (URC)
Batangas City
05.2007 - 03.2010
- Operated the main slitting machine according to production targets and standard operating procedures.
- Set and monitored machine parameters to maintain product quality.
- Conducted in-process quality control inspections and roll-hardness testing.
- Monitored equipment performance and reported abnormalities.
- Maintained production and quality records.
- Assisted engineering personnel with equipment maintenance and troubleshooting.
- BOPP Plant, JG Summit Petrochemical Complex, Batangas City, Philippines
Education
Bachelor of Industrial Technology - Mechanical Engineering Technology
Batangas State University
04.2007
Skills
- Instrument Installation
- Calibration
- Troubleshooting
- Flow Instrumentation
- Level Instrumentation
- Pressure Instrumentation
- Temperature Instrumentation
- Loop Checking
- Functional Testing
- Commissioning
- Instrument Cable Testing
- Continuity Testing
- Termination
- Preventive Maintenance
- Predictive Maintenance
- Corrective Maintenance
- Fire and Gas Detection Systems
- Inspection
- Surface Preparation
- Corrosion Under Insulation (CUI) Inspection
- Eddyfi Lyft Inspection Techniques
- Leak Detection and Repair (LDAR)
- Fugitive Emissions Monitoring
- Blasting
- Painting Tools and Equipment
- Surface Preparation Using Hand Tools
- Surface Preparation Using Power Tools
- Paint and Coating Identification
- Paint and Coating Classification
- Coating Thickness Measurement
- Paint Mixing
- Manual Coating Application
- Airless Coating Application
- Occupational Health and Safety Procedures
- Permit-to-Work Systems
- Hazard Identification and Reporting
- Quality Standards
- Work Procedures
- Equipment Setup
- Equipment Operation
- Basic Maintenance
- Teamwork
- Workplace Communication
- Professionalism
Certification
BLASTING AND PAINTING TRAINING – The Forks Training and Assessment Solutions, Inc.,
Basic Competencies: Participate in Workplace Communication; Work in a Team Environment; Practice Career Professionalism; Practice Occupational Health and Safety Procedures
Common Competencies: Set Up Tools and Equipment; Observe Procedures and Manuals of Instructions; Perform Basic Maintenance; Apply Quality Standards
Core Competencies: Handle and Operate Blasting and Painting Tools and Equipment; Perform Correct Surface Preparation Using Hand or Power Tools; Identify and Classify Paint Types and Coatings; Measure Coating Thickness and Understand Drying Mechanisms; Mix and Apply Coatings Using Airless or Manual Application Methods
Training
- Eddyfi Lyft Inspection Training
- Corrosion Under Insulation (CUI) Certification Training
- ASNT (American Society for Nondestructive Testing) Training
- Leak Detection and Repair (LDAR) Fundamentals
- Nondestructive Examination (NDE)
- Managing Pressure and Leak Testing
- OSHA Training Certification
- Working at Height
- Hazard Identification
- Lifting and Rigging Awareness
- Confined Space Entry
- Hydrogen Sulfide (H₂S) Awareness
- Emergency Response
- Hand Safety and Manual Handling
- Defensive Driving Refresher Course
- Commissioning QS-GTL Breathing Apparatus Training
Timeline
Maintenance Inspector
Aker Solutions
07.2016 - 04.2018
Instrument Technician – Loop Testing
Samyoung Engineering & Construction Co. Ltd.
10.2014 - 04.2015
Instrument Technician
Daemyung Engineering & Construction Co. Ltd.
05.2012 - 05.2014
Instrument Technician
Hyundai Heavy Industries Co. Ltd. – Shell Pearl GTL Project
03.2010 - 09.2011
Primary Slitting Operator / Maintenance
Universal Robina Corporation (URC)
05.2007 - 03.2010
Bachelor of Industrial Technology - Mechanical Engineering Technology
Batangas State University