Jose Noel Maulit

• Responsible for the efficient planning, organizing, leading and control of general activities, ensuring development and implementation of efficient operations and cost-effective systems to meet required organizational targets.
• Responsible for the consistent integration of 4M for the attainment of efficient output based on C+SQCD.
• Responsible for the efficient deployment of PDCA Cycle and ensure attainment of set targets.
• Responsible for the setting up and control of sectional / departmental and individual KPIs as well as Continuous Improvement Activities for C+SQCD.
• Spearheaded cross-functional initiatives across departments to achieve business goals for bottom-line profits.
• Assures deployment of Operational Risk Mitigation based on the principle of FMEA , HIRADC, EIA, etc.
• Attends trade shows and client meetings, promoting brand and building rapport with prospects.
• Oversee hiring, adding valuable, talented professionals to strengthen management team.
• Identifies and resolve issues between employees, promoting better collaboration and mutual respect.
• Evaluates product development strategies and prepared alternative approaches to goal achievement.
• Identifies opportunities to improve business process flows and productivity.
• Reviews and approved proposed projects involving OPEX and CAPEX.
• Drove short-term and advanced promotional initiatives and planning processes.

• Responsible for the planning, organizing, leading, and control of man, machine, material, method, including money, and safety for the implementation of necessary projects and improvements for manufacturing operations, safety, compliance, and continuous improvements. It further includes the conceptualization, design, documentation, execution, commissioning, as well as the ascertainment of projects effectiveness and consistency with its purpose.
• Responsible for the complete planning for the introduction of new models at Paint Shop. This include the general requirements for viability studies, 4M efficient integration / deployment, processes and quality confirmations, safety and regulation compliances, and synchronization of activities with other Assembly Shops.
• Responsible for the complete deployment of corresponding PDCA system for all projects and activities in order to attain planned targets as well as to resolved related problems.
• Directs and monitors the activities of vendors who are required to act for and in behalf of the corporation (MMPC), to transact permits with the following government agencies:
  1. Philippine Economic Zone Authority (PEZA).
  2. Greenfield Development Corporation, at Greenfield Automotive PGAP-SEZ).
  3. Department of Labor and Employment (DOLE).
  4. Bureau of Fire Protection (BFP).
  5. Local Government Unit (LGU – Sta. Rosa).
• Directs and manage review and approval of construction drawings and other related documents for the application of Construction Permits, Occupancy Permits, Permit to Operate, Bureau of Fire Protection Certificate from PEZA, BFP and other regulating agencies.
• Directs and manage the necessary control and documentations as required by law to maintain the company’s Good Standing as regards compliance to DOLE-SHE.
• Directs and control subordinates for the implementation of all management policies as a necessary compliance to the statutory laws in relation to Labor Laws and Standards, and Occupational Safety and Health.
• Directs Section’s collaboration with other Section / Department to carry out the over-all objective of Manufacturing Division as regards company CRR, Safety and Environmental Policies and other relative regulations.
• Directs planning, organizing, execution, and control of Production Engineering projects and activities in consonance with Section’s deliverables.
• Directs and manage the daily planning, organizing, including the necessary coordination of PPE with other Sections, Department, and Division as regards proposals, plans, studies and activities.
• Review and process Section’s annual budget.
• Attends and participates in the inter-departmental meetings.
• Directs the Section’s continuous cost saving projects through 4M improvements.
• Manage the ascertainment of structural soundness, including the stability checking of all mechanical, electrical, and structural components of equipment and facilities against induced stresses due to normal use, environmental or calamities.
• Directs and manage the continuous study and setting up of new and upgraded facilities, cost-saving facilities improvement necessary to keep MMPC to the optimum level of operation. This includes process utility study, equipment planning and risk management.
• Reviews submitted drawings relative to Project & Plant Engineering function. Prepares scheduled reports and accomplishments for Management's consumption.
• Review cost estimations, documentations, and other related activities for the execution of projects.
• Performs safety duties and responsibilities, and complies with all the safety standards indicated in the Safety Manual.
• Manage Section’s manning and operational systems.
• Responsible for the design and the study in setting up of new facilities for manufacturing improvement. This also includes VA / VE studies.
• Directs the extension of technical support for the improvement of manufacturing operation.
• Plans and effectively controls Section’s annual CAPEX and OPEX budget.
• Abides by the confidentiality clause and technology secrecy policy of the Company. Dispenses only non-vital information inside and outside the company as approved and instructed by Superiors.
• Performs safety duties and responsibilities, and complies with all the safety standards indicated in the Safety Manual.
• Performs other related tasks may be assigned from time to time.
• Responsible for the consistent integration of 4M for the attainment of efficient output based on C+SQCD.
• Responsible for the setting up and control of sectional and individual KPIs as well as Continuous Improvement Activities for C+SQCD.
• Directs planning, organizing, execution, and control of PPE’s projects and activities in consonance with Section’s deliverables.Carried out day-to-day duties accurately and efficiently.
• Used critical thinking to break down problems, evaluate solutions and make decisions.
• Conducted research, gathered information from multiple sources and presented results.
• Learned new skills and applied to daily tasks to improve efficiency and productivity.
• Participated in continuous improvement by generating suggestions, engaging in problem-solving activities to support teamwork.
• Managed team of employees, overseeing hiring, training and professional growth of employees.
• Participated in team-building activities to enhance working relationships.

General Job Description:

• Responsible for the planning, organizing, leading, and control of man, machine, material, method, including money, and safety for the implementation of necessary projects and improvements for manufacturing operations, safety, compliance, and continuous improvements. It further includes the conceptualization, design, documentation, execution, commissioning, as well as the ascertainment of projects effectiveness and consistency with its purpose.
• Directs and acts for and in behalf of the corporation (MMPC), to transact business with the following government agencies:
  1. Philippine Economic Zone Authority (PEZA).
  2. Greenfield Development Corporation, at Greenfield Automotive PGAP-SEZ).
  3. Manila Electric Company (Meralco).
  4. Bureau of Fire Protection (BFP).
  5. Local Government Unit (LGU – Sta. Rosa).
• Directs and manage review and approval of construction drawings and other related documents for the application of Construction Permits, Occupancy Permits, Permit to Operate, Bureau of Fire Protection Certificate from PEZA, BFP and other regulating agencies.
• Directs and manage the necessary control and documentations as required by law to maintain the company’s Good Standing as regards compliance to DOLE-SHE.
• Directs and control subordinates for the implementation of all management policies as a necessary compliance to the statutory laws in relation to Labor Laws and Standards, and Occupational Safety and Health.
• Directs Section’s collaboration with other Section / Department to carry out the over-all objective of Manufacturing Division as regards company CRR, Safety and Environmental Policies and other relative regulations.
• Directs planning, organizing, execution, and control of Production Engineering projects and activities in consonance with Section’s deliverables.
  Directs and manage the daily planning, organizing, including the necessary coordination of PPE with other Sections, Department, and Division as regards proposals, plans, studies and activities.
  Review and process Section’s annual budget.
• Attends and participates in the inter-departmental meetings.
  Directs the Section’s continuous cost saving projects through 4M improvements.
• Manage the ascertainment of structural soundness, including the stability checking of all mechanical, electrical, and structural components of equipment and facilities against induced stresses due to normal use, environmental or calamities.
• Directs and manage the continuous study and setting up of new and upgraded facilities, cost-saving facilities improvement necessary to keep MMPC to the optimum level of operation. This includes process utility study, equipment planning and risk management.
• Reviews submitted drawings relative to Project & Plant Engineering function. Prepares scheduled reports and accomplishments for Management's consumption.
  Review cost estimations, documentations, and other related activities for the execution of projects.
• Performs safety duties and responsibilities, and complies with all the safety standards indicated in the Safety Manual.
  Manage Section’s manning and operational systems.
  Responsible for the design and the study in setting up of new facilities for manufacturing improvement. This also includes VA / VE studies.
• Directs the extension of technical support for the improvement of manufacturing operation.
  Plans and effectively controls Section’s annual CAPEX and OPEX budget.
• Abides by the confidentiality clause and technology secrecy policy of the Company. Dispenses only non-vital information inside and outside the company as approved and instructed by Superiors.
• Performs safety duties and responsibilities, and complies with all the safety standards indicated in the Safety Manual.
  Performs other related tasks may be assigned from time to time.
• Responsible for the consistent integration of 4M for the attainment of efficient output based on C+SQCD.
• Responsible for the setting up and control of sectional and individual KPIs as well as Continuous Improvement Activities for C+SQCD.
• Directs planning, organizing, execution, and control of Production Engineering projects and activities in consonance with Section’s deliverables. Carried out day-to-day duties accurately and efficiently.
• Managed team of employees, overseeing hiring, training and professional growth of employees.

General Job Description:

Responsible for the planning, organizing, leading, and control of man, machine, material, method, including money, and safety for the implementation of necessary projects and improvements for manufacturing operations, safety, compliance, and continuous improvements. It further includes the conceptualization, design, documentation, execution, commissioning, as well as the ascertainment of projects effectiveness and consistency as planned.

Directs and acts for and in behalf of the corporation (MMPC), to transact business with the following government and private agencies:
1. Philippine Economic Zone Authority (PEZA).
2. Greenfield Development Corporation, at Greenfield Automotive Park (GAP-SEZ).
3. Manila Electric Company (Meralco).
4. Bureau of Fire Protection (BFP).
5. Local Government Unit (LGU – Sta. Rosa).

Directs and manage review and approval of construction drawings and other related documents for the application of Construction Permits, Occupancy Permits, Permit to Operate, Bureau of Fire Protection Certificate from PEZA, BFP and other regulating agencies.

Directs and manage the necessary control and documentations as required by law to maintain the company’s Good Standing as regards compliance to DOLE-SHE.

Directs and control subordinates for the implementation of all management policies as a necessary compliance to the statutory laws in relation to Labor Laws and Standards, and Occupational Safety and Health.

Directs Section’s collaboration with other Sections / Departments to carry out the over-all objective of Manufacturing Division as regards company CRR, Safety and Environmental Policies and other relative regulations.

Directs planning, organizing, execution, and control of Production Engineering projects and activities in consonance with Section’s deliverables.

Directs and manage the daily planning, organizing, including the necessary coordination of PPE with other Sections, Department, and Division as regards proposals, plans, studies and activities.

Review and process Section’s annual budget.

Attends and participates in the inter-departmental meetings.

Directs the Section’s continuous cost saving projects through 4M improvements.

Manage the ascertainment of structural soundness, including the stability checking of all mechanical, electrical, and structural components of equipment and facilities against induced stresses due to normal use, environmental or calamities.

Directs and manage the continuous study and setting up of new and upgraded facilities, cost-saving facilities improvement necessary to keep MMPC to the optimum level of operation. This includes process utility study, equipment planning and risk management.

Reviews submitted drawings relative to Project & Plant Engineering function. Prepares scheduled reports and accomplishments for Management's consumption.

Review cost estimations, documentations, and other related activities for the execution of projects.

Performs safety duties and responsibilities, and complies with all the safety standards indicated in the Safety Manual.

Manage Section’s manning and operational systems.

Responsible for the design and the study in setting up of new facilities for manufacturing improvements. This also includes VA / VE studies.

Directs the extension of technical support for the improvement of manufacturing operation.

Plans and effectively controls Section’s annual CAPEX and OPEX budget.

Responsible for the consistent integration of 4M for the attainment of efficient output based on C+SQCD.

Participates in the continuous improvement by generating suggestions, engaging in problem-solving activities to support teamwork.

Managed team of employees, overseeing hiring, training and professional growth of employees.

Performs other related tasks may be assigned from time to time.

General Job Description:

Responsible for the review and assessment of submitted engineering information and changes in vehicle specification. Directs and controls activities related to Production Engineering functions and responsibilities. Responsible for the general in-plant and out-plant production processes implementation; reviews and recommends approval for production line set-up, facilities planning, manning requirements, work standards & job distributions, that will assure competitive man-hours and viable assembly workability.

Detailed Job Description:
a. Decides on section’s manning and operational systems.

b. Reviews and approves Paint Shop Assembly Operation Standards.

c. Develops and initiates continuous study to improve existing plant set-up, upgrading equipment and facilities to be at par with industry trend and to meet market demands.

d. Responsible in ascertaining that all 4M requirements, including standard references (Kanban and Work Instructions) are completely and correctly provided. This provision likewise shall be applicable, but is not limited to, regular production operation, introduction and upgrade / downgrade of equipment or facility, model change, and the introduction of new models.

e. Oversees the conduct of periodic review of established standard and process audit to further improve production line productivity and efficiency.

f. Coordinates closely and supports Production and Quality in resolving day by day assembly problems related to process, parts, equipment, tools and materials.

g. Reviews and approve designs and studies in setting up of new facilities for capacity increases or process improvement necessary for plant operation and expansion. This also includes VA / VE studies.

h. Responsible for establishment of line capacity and assembly standards for paint shop and plastic paint operation.

i. Responsible for the extension of technical support for paint shop production operation and maintenance.

j. Responsible for the supervision of construction and improvement projects both on equipment and facilities at paint shop. This also includes preparation of bid documents, project cost estimate, project schedule preparation and project environmental impact assessment.

k. Responsible for the evaluation and approval of non-productive materials based on MSDS and actual line trial.

l. Assists Production in resolving day-by-day assembly problems related to process, parts, equipment, tools & materials.

m. Plans and effectively controls Section’s annual CAPEX and OPEX budget.

n. Improves approved Department policies, systems and procedures

o. Oversees dissemination of information and manages subordinates activities to have a common understanding to achieve Sectional goals and targets (KPI).

p. Direct and assigns personnel actions such as identification of training needs, monitoring and evaluation of performance of subordinates and recommendation for manpower movements and requirements.

q. Performs safety duties and responsibilities, and complies with all the safety standards indicated in the Safety Manual.

r. Performs other related tasks may be assigned from time to time.

• Plans, organizes, directs, measures and controls all activities related to Paint Engineering functions and responsibilities as follows;
  - Development and issuance of Paint Assembly Operation Standards.
  
  - Develops and initiates continuous study to improve existing plant set-up, upgrading of equipment and facilities to be at par with industry trend and meet market demands.
  
  - Spearhead the launching of new model assuring that the required processes, tools, equipment, assembly jigs and fixtures, materials (NP/IP) and manpower requirements are provided, establish the standard operating parameters and specifications in each process.
  
  - Initiates and performs periodic review of established standard and conducts process review to further improve production line productivity and efficiency.
  
  - Responsible for the design and study in setting up of new facilities for capacity increases or process improvement necessary for plant operation and expansion. This also includes VA/VE studies.
  - Responsible for the establishment of line capacity and assembly standards for paint shop and plastic paint operation.
  
  - Responsible for the extension of technical support for paint shop production operation and maintenance.
  
  - Responsible for the supervision of construction and improvement priojects both on equipment and facilities at paint shop. This also includes preparation of bid documents, project cost estimate, project schedule preparation and project environmental impact assessment.
  
  - Responsible for the evaluation of non-productive materials based on MSDS and actual line trial.
  
  - Assists production in resolving day by day assembly problems related to process, parts, equipment, tools and materials.
  
  - Plans and effectively control Sections annual CAPEX and OPEX budget.
  
  - Assists in setting up and implementation of approved Departmental policies, systems and procedures.
  
  - Disseminates information and manage subordinates activities to have a common understanding to achieve Sectional goals and targets (KPI).
  
  - Recommends and initiates personnel actions such as identification of training needs, monitoring and evaluation of performance of subordinates and recommendation for manpower movements and requirements.
  
  - Keep superior well informed of the activities of the Section.
  
  - Ensures housekeeping is maintained at a high level at all times within the area of responsibility.
  
  - Represents Paint Eng’g section in meetings and discussions as required.
  
  - Complies with safety standards and policy and observes all prescribed work practices seeing to it that subordinates also abides by it.
  
  - Promptly dispenses judgment on all unsafe actions, practices or condition observed while working.
  
  - Immediately reports to superiors all accidents and injuries occurring within the scope of his employment.

• Responsible for the adoption and implementation of Lean Manufacturing at Paint Shop. This includes continuous study for process automation through instrumentation, improvement of manpower work distribution, facility layout, process flow, waste minimization, line load leveling, and operation visual control system.
• Responsible for the design and study in setting up of new facilities for capacity increases or process improvement necessary for plant operation and expansion. This also includes VA / VE studies.
• Responsible for the establishment of line capacity and assembly standards for paint shop and plastic paint operation.
• Responsible for the monitoring and counterchecking of quality management procedures implementation.
• Responsible for the preparation of proposed annual manufacturing budget and plans for paint shop operation (Capital Expense and Operating Expense).
• Responsible for the overall supervision for the introduction of new models at paint shop. This includes preparation of assembly line operation sheets, design and fabrication of painting special tools, requisitioning, and testing of productive materials, training of line workers, etc.
• Responsible for the extension of Technical support for Paint Shop production operation and Maintenance (including training of new employees to basic process operation and equipment operations / maintenance).
• Responsible for the managing of subordinates activities, training programs and hiring of new staffs.
• Responsible for the planning and scheduling of annual plant improvements projects, including coordination of activities with others sections and department in order not to hamper production operations during the projects executions.
• Responsible for the supervision (Project Engineer) of construction and improvement projects both on equipment and facilities at Paint Shop. This also includes preparation of Bid Documents, Project Cost Estimate, Project Schedule Preparation (MS Project), and Project Environmental Impact preparation.
• Responsible for the evaluation of non-productive materials based on MSDS and actual line trial.
• Responsible for the design and some drafting works (Autocad) as well as checking of all paint shop projects drawings.

• Same with current duties and responsibilities as Senior Supervisor for Paint Shop.

• Responsible for the establishment of work measurement programs and analyses work samples to develop standards for manpower work distribution.
• Responsible in investigating Productive and Indirect Production Material wastages, restructuring job functions and recommends work station relocations and equipment requisitioning.
• Responsible in coordinating and counterchecking the implementation of quality management procedures.
• Responsible in analyzing manpower distribution, facility layout, operational data, and production schedules, and costs to determine the optimum operation for manpower and equipment.
• Responsible for the introduction of new models and production preparation such as installation of new equipment and introduction of new processes.
• Responsible for the setting up of new facilities for capacity increases or process improvement necessary for plant operation.
• Responsible in establishing line capacity and assembly standards.
• Responsible in the design and drafting of all paint shop projects including the preparation of Bill of Materials.

• Prepares and monitors data relative to Production Operation. Provide information which includes Operation Man-Hour Report, Assembly Situation Report, Sectional Performance Report, Daily Man-Hour Report, etc.
• Completes logs and reports detailing production data such as volume, materials used and quality assurance results, helping management make accurate operational decisions.

• Performs welding operation on body / chassis parts using arc and gas welding equipment in accordance to the prescribed level of volume, schedule, quality, cost and safety.
• Other jobs includes :
   Checking of completeness and correctness of parts fed, reports missing / lacking parts to immediate supervisor.
   Checking and maintaining operating conditions of welding machine and its accessories.
   Checking and maintaining the availability of consumables and other related materials.
   Reporting / coordinating equipment breakdown to the immediate supervisor or maintenance personnel for immediate action.
   Setting, loading and unloading parts or sub-assembled parts on jigs and set special tools or jigs.
   Performs welding machine minor repair.
   Checking of completeness and correctness of parts fed, reports missing and lacking parts to the immediate superior.
   Prepares parts needed for sub-assembly.
   Checking and maintaining operating condition of spot welding guns being utilized.
   Conducts spot welding tip dressing regularly.
   Setting, loading and unloading parts or sub-assembled parts on jigs.
   Reports / coordinates equipment breakdown to the immediate supervisor or maintenance personnel for immediate corrective actions.