Jorge De Vera
Kunshan, Jiangsu
Summary
Responsible and highly motivated professional with years of experience as Project Manager/Senior Manufacturing/Process/Product Engineer in a Manufacturing Assembly Environment (EMS, OEM and ODM). Enhancing processes and product designs, strategic management, exceeding production targets, developing process and manufacturing engineering programs and plans for continuous improvements, and enthusiastic customer relations.
Overview
19
19
years of professional experience
Work History
Project Quality Manager
Luxshare Electronic Technology (Kunshan) Co., Ltd.
08.2023 - Current
- Lead and drive team of Quality Engineers on manufacturing quality issues.
- Collaborates with cross functional team to drive on critical quality issues (line alert, line stop, stop ships).
- Directly responds and supports customer queries on manufacturing related issues
- Leading team on NPI preparation, costing, defines NRE for prototype/engineering build.
- Ensure external/internal engineering plan properly execute as per set procedure in order to meet customer project plan requirement.
Project Management Manager
Hi-P Philippines Technology Corporation
03.2021 - 08.2023
- Performed RFQ for new products of existing customer and new customers (PCBA and Final Assy).
- Liaise to customer with regards to overall project activities and progress, then cascade to team and closely monitoring status.
- Provide input and technical support to customer, DFM/DFA review and give input proposal to customer for better product manufacturability.
- BOM generation (Scrubbing), handling of ECO/ECN implementation.
- Lead team in providing corrective/preventive action on every build issues and improvement actions.
Project Management Engineer
Kaifa Technology Co., Ltd. (Dongguan)
11.2017 - 03.2020
- Perform RFQ for new products of existing customer and new customers (PCBA and Final Assy).
- Liaise to customer with regards to overall project activities and progress, then cascade to team and closely monitoring status.
- Provide input and technical support to customer, DFM/DFA review and give input proposal to customer for better product manufacturability.
- BOM generation (Scrubbing), handling of ECO/ECN implementation.
- Lead team in providing corrective/preventive action on every build issues and improvement actions.
Senior Manufacturing Engineer
Jabil Circuit Sdn. Bhd. (Penang)
09.2015 - 08.2017
- Lead team on NPI preparation, costing, defines NRE for prototype/engineering build.
- Liaise to customer with regards to overall project activities and progress, then cascade to team and closely monitoring status.
- Provide input and technical support to customer, DFM/DFA review and give input proposal to customer for better product manufacturability.
Senior Manufacturing Engineer
Jabil Circuit Co., Ltd. (Ho Chi Minh)
04.2013 - 07.2015
- Schneider work cell Project Engineer/ME Lead, responsible for both NPI and Mass Pro/Sustaining models.
- Lead team on NPI preparation, costing, defines NRE for prototype/engineering build.
- Liaise to customer with regards to overall project activities and progress, then cascade to team and closely monitoring status.
- Provide input and technical support to customer, DFM/DFA review and give input proposal to customer for better product manufacturability.
- Leading Schneider WC ME/MET, define key goals and continues plan/action to meet set goals. Coordinate and review with Human resource on H/C attrition and ensure replacement on track to avoid big impact on UPH and productivity.
Lead Quality Engineer (Apple NPI and Sustaining)
Jabil Circuit Co., Ltd. (Wuxi)
01.2012 - 04.2013
- Ensure external/internal engineering plan properly execute as per set procedure in order to meet customer project plan requirement.
- Monitor and drive product performance through weekly internal quality review.
- Ensure that all Quality Key Index are maintained above desired yield goals.
- Directly reports to customer for weekly KPI evaluation.
- Coordinate with customer on First Article Run approval, Part Approval, Evaluation Run and any conference call Proto Build Review, provide post DFA and DFM report and discuss to customer for timely closure.
Lead Process Engineer (PSION)
Flextronics Technology Co., Ltd. (Nanjing)
09.2010 - 09.2012
- Overall responsible for Psion operations both sustaining and new product/transfer product introduction
- Ensure KOI such as OTD (on time delivery), WO (work order aging), DOS WIP, etc.
- Lead team - Engineers, PQA, production, technicians in daily production meeting to ensure problem or issue were address immediately with concrete action, review productivity and shipment and review MRB/RMA
- Communicate with customer for existing NPI, provide input and technical support when needed. Also for quality review and NPI weekly conference call
- Provide technical guidance and proposal thru DFM and DFA
Quality Engineer (CISCO Backplane)
Jabil Circuit Co., Ltd. (Shanghai)
01.2010 - 09.2010
- Monitor and drive product performance through weekly internal quality review.
- Ensure that all Quality Key Index are maintained above desired yield goals.
- Directly reports to customer for weekly KPI evaluation.
- Coordinate with customer on First Article Run approval, Part Approval, Evaluation Run and any conference call Proto Build Review, provide post DFA and DFM report and discuss to customer for timely closure.
Process Engineer
Flextronics Technology
01.2005 - 01.2010
- Initiates NPI Checklist meeting and generates project time plan/Gantt chart of activities.
- Perform pre-engineering duties such us process control creation and set-up, design of stencils, deciding build technology, define new processes/methodology and tooling.
- Review Design for Manufacturability and verify on actual build, interface with customer to review DFM and Post DFM every after build.
- Generates action tracker report on product being developed. Analyze and provides solutions to prevent reoccurrence of problem on next build.
- Design and fabrication of tooling, fixture, stencils and jig. Qualification and validation prior to manufacturing use.
Education
Bachelor of Science - Mechanical Engineering
Central Luzon Polytechnic College
Cabanatuan City, Province Of Nueva Ecija, Philippines03.1997
Skills
- Team Leadership
- Performance Metrics
- Risk Management
- Training Development
- Decision-Making
- Organizational Skills
Accomplishments
- Successfully completed NPI products for Meter PCBA and Schneider Relay and Drive.
- Lean Sigma Bronze Certified
- Led Schneider team on ETE Yield improvement from 90% to 96%
- Involved in site qualification for PoP, 0.4mm pitch BGA/CSP, 1005 chips and 0.3mm pitch connector that led Flextronics Penang, achieving the customer's new design products.
Timeline
Project Quality Manager
Luxshare Electronic Technology (Kunshan) Co., Ltd.
08.2023 - Current
Project Management Manager
Hi-P Philippines Technology Corporation
03.2021 - 08.2023
Project Management Engineer
Kaifa Technology Co., Ltd. (Dongguan)
11.2017 - 03.2020
Senior Manufacturing Engineer
Jabil Circuit Sdn. Bhd. (Penang)
09.2015 - 08.2017
Senior Manufacturing Engineer
Jabil Circuit Co., Ltd. (Ho Chi Minh)
04.2013 - 07.2015
Lead Quality Engineer (Apple NPI and Sustaining)
Jabil Circuit Co., Ltd. (Wuxi)
01.2012 - 04.2013
Lead Process Engineer (PSION)
Flextronics Technology Co., Ltd. (Nanjing)
09.2010 - 09.2012
Quality Engineer (CISCO Backplane)
Jabil Circuit Co., Ltd. (Shanghai)
01.2010 - 09.2010
Process Engineer
Flextronics Technology
01.2005 - 01.2010
Bachelor of Science - Mechanical Engineering
Central Luzon Polytechnic College
Similar Profiles
Teeratorn SirivichitvorakarnTeeratorn Sirivichitvorakarn
Japanese’s Support Staff at Co., Ltd.Japanese’s Support Staff at Co., Ltd.
Arya Arun KamatArya Arun Kamat
Student Intern at Zhongke Zhongkun (Kunshan) Science and TechnologyStudent Intern at Zhongke Zhongkun (Kunshan) Science and Technology
Yiwen WangYiwen Wang
Inernship at Chengdu Leishitiandi electronic technology companyInernship at Chengdu Leishitiandi electronic technology company