JESSIE ALVAREZ CORBITO
DasmarinasCity
Summary
To apply knowledge that I have gained in my institution that can be useful in your company.
Overview
20
20
years of professional experience
Work History
Site Engineer
JJB EERS
01.2022 - Current
Technical Supervisor
JobLink Business Solution
Las Pinas
08.2023 - 01.2024
Master Electrician
Colliers International
06.2018 - 03.2023
- Controls equipment, such as current converters, voltage transformers, and circuit breakers, regulates the flow of electricity through substation of electric power system and over distribution lines to consumers: Records readings of switchboard instruments to compile data concerning quantities of electric power used for substation operation and amounts distributed from the station.
- Communicates with the LOAD DISPATCHER to report the amount of electricity received into the substation, and to receive switching instructions.
- Observe switchboard instruments to detect indications of line disturbances, such as grounded, shorted, or open circuits.
- Pulls circuit breaker switch or pushes buttons to interrupt the flow of current in disturbed line preparatory to repair, and to connect the alternate circuit to carry load of de-energized lines.
- Records the temperature of transformers at specified intervals.
- Inspection equipment, such as transformers, pumps, fans, batteries, and circuit breakers to detect defects.
- Calculates average and peak load conditions from electric recording instrument data and compiles periodic reports of load variations for system planning purposes.
- May locate and replace defective fuses and switches, using test lamp and hand tools.
- May be designated according to the primary function of the substation as Substation Operator, Conversion; Substation Operator, Distribution; Substation Operator, Transforming.
- May operate auxiliary generators and be designated Substation Operator, Generation.
- May control several remote-controlled substations from the central station switchboard and be designated Substation Operator, Automatic.
Electrician/Line Guard Substation/AC Tech
Atalian Global Services-PNB Head Office
04.2015 - 06.2018
- Controls equipment, such as current converters, voltage transformers, and circuit breaks, regulate the flow of electricity through the Sub-station of the electric power system and over distribution lines to consumers: Records readings of switchboard instruments to compile data concerning quantities of electric power used for substation operation and amounts distributed from the station.
- Communicate with the LOAD DISPATCHER to report the amount of electricity received into the substation, and to receive switching instructions.
- Observe switchboard instruments to detect indications of line disturbances, such as grounded, shorted, or open circuits.
- Pulls circuit breaker switch or pushes buttons to interrupt the flow of current in disturbed line preparatory to repair, and to connect the alternate circuit to carry load of de-energized lines.
- Record the temperature of transformers at specified intervals.
- Inspection of the equipment, such as transformers, pumps, fans, batteries, and circuit breakers to detect defects.
- Calculate average and peak load conditions from electric recording instrument data and compile periodic reports of load variations for system planning purposes.
- May locate and replace defective fuses and switches, using test lamp and hand tools.
- May be designated according to the primary function of the substation as Substation Operator, Conversion; Substation Operator, Distribution; Substation Operator, Transforming.
- May operate auxiliary generators and be designated Substation Operator, Generation.
- May control several remote-controlled substations from the central station switchboard and be designated Substation Operator, Automatic.
Electrician
Hypervolt Inc.
03.2012 - 10.2013
- Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
- Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
- Connect wires to circuit breakers, transformers, or other components.
- Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
- Advise management on whether continued operation of equipment could be hazardous.
- Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of the system.
- Maintain current electrician's license or identification card to meet governmental regulations.
- Plan layout and installation of electrical wiring, equipment, and fixtures, based on job specifications and local codes.
- Direct and train workers to install, maintain, or repair electrical wiring, equipment, and fixtures.
- Prepare sketches or follow blueprints to determine the location of wiring and equipment and to ensure conformance to building and safety codes.
- Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and test lamps.
- Install ground leads and connect power cables to equipment, such as motors.
- Perform business management duties such as maintaining records and files, preparing reports, and ordering supplies and equipment.
- Repair or replace wiring, equipment, and fixtures, using hand tools and power tools.
- Work from ladders, scaffolds, and roofs to install, maintain, or repair electrical wiring, equipment, and fixtures.
- Place conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
- Construct and fabricate parts, using hand tools and specifications.
- Fasten small metal or plastic boxes to walls to house electrical switches or outlets.
- Perform physically demanding tasks, such as digging trenches to lay conduits and moving and lifting heavy objects.
- Provide preliminary sketches and cost estimates for materials and services.
- Provide assistance during emergencies by operating floodlights and generators, placing flares, and driving needed vehicles.
Electrician
Gigatech Inc.
07.2011 - 03.2012
- Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
- Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
- Connect wires to circuit breakers, transformers, or other components.
- Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
- Advise management on whether continued operation of equipment could be hazardous.
- Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of the system.
- Maintain current electrician's license or identification card to meet governmental regulations.
- Plan layout and installation of electrical wiring, equipment, and fixtures, based on job specifications and local codes.
- Direct and train workers to install, maintain, or repair electrical wiring, equipment, and fixtures.
- Prepare sketches or follow blueprints to determine the location of wiring and equipment and to ensure conformance to building and safety codes.
- Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and test lamps.
- Install ground leads and connect power cables to equipment, such as motors.
- Perform business management duties such as maintaining records and files, preparing reports, and ordering supplies and equipment.
- Repair or replace wiring, equipment, and fixtures, using hand tools and power tools.
- Work from ladders, scaffolds, and roofs to install, maintain, or repair electrical wiring, equipment, and fixtures.
- Place conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
- Construct and fabricate parts, using hand tools and specifications.
- Fasten small metal or plastic boxes to walls to house electrical switches or outlets.
- Perform physically demanding tasks, such as digging trenches to lay conduits and moving and lifting heavy objects.
- Provide preliminary sketches and cost estimates for materials and services.
- Provide assistance during emergencies by operating floodlights and generators, placing flares, and driving needed vehicles.
Electrician
Topnet Electrical and Cable Installation
12.2009 - 10.2010
- Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
- Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
- Connect wires to circuit breakers, transformers, or other components.
- Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
- Advise management on whether continued operation of equipment could be hazardous.
- Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of the system.
- Maintain current electrician's license or identification card to meet governmental regulations.
- Plan layout and installation of electrical wiring, equipment, and fixtures, based on job specifications and local codes.
- Direct and train workers to install, maintain, or repair electrical wiring, equipment, and fixtures.
- Prepare sketches or follow blueprints to determine the location of wiring and equipment and to ensure conformance to building and safety codes.
- Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and test lamps.
- Install ground leads and connect power cables to equipment, such as motors.
- Perform business management duties such as maintaining records and files, preparing reports, and ordering supplies and equipment.
- Repair or replace wiring, equipment, and fixtures, using hand tools and power tools.
- Work from ladders, scaffolds, and roofs to install, maintain, or repair electrical wiring, equipment, and fixtures.
- Place conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
- Construct and fabricate parts, using hand tools and specifications.
- Fasten small metal or plastic boxes to walls to house electrical switches or outlets.
- Perform physically demanding tasks, such as digging trenches to lay conduits and moving and lifting heavy objects.
- Provide preliminary sketches and cost estimates for materials and services.
- Provide assistance during emergencies by operating floodlights and generators, placing flares, and driving needed vehicles.
Electrician
A.V.R.B. Electrical Contracting
01.2006 - 09.2009
- Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
- Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
- Connect wires to circuit breakers, transformers, or other components.
- Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
- Advise management on whether continued operation of equipment could be hazardous.
- Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of the system.
- Maintain current electrician's license or identification card to meet governmental regulations.
- Plan layout and installation of electrical wiring, equipment, and fixtures, based on job specifications and local codes.
- Direct and train workers to install, maintain, or repair electrical wiring, equipment, and fixtures.
- Prepare sketches or follow blueprints to determine the location of wiring and equipment and to ensure conformance to building and safety codes.
- Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and test lamps.
- Install ground leads and connect power cables to equipment, such as motors.
- Perform business management duties such as maintaining records and files, preparing reports, and ordering supplies and equipment.
- Repair or replace wiring, equipment, and fixtures, using hand tools and power tools.
- Work from ladders, scaffolds, and roofs to install, maintain, or repair electrical wiring, equipment, and fixtures.
- Place conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
- Construct and fabricate parts, using hand tools and specifications.
- Fasten small metal or plastic boxes to walls to house electrical switches or outlets.
- Perform physically demanding tasks, such as digging trenches to lay conduits and moving and lifting heavy objects.
- Provide preliminary sketches and cost estimates for materials and services.
- Provide assistance during emergencies by operating floodlights and generators, placing flares, and driving needed vehicles.
Education
Bachelor of Science - Electrical Engineer (BSEE) ATEEAP
Manuel S. Enverga University Foundation
Lucena CityVocational - Automotive and Electronics, Welding and Wiring Installation
Torres High School
Secondary -
Ramon Avancena High School
San Miguel, ManilaPrimary -
Trinidad Tecson Elementary School
sampalok, ManilaSkills
- Building Wiring Installation
- Sub-Station Power Plant
- Motor control
- Winding motor
- Pipe Welder NC II Holder TESDA w/ WQT
- SMAW
- GMAW
- GTAW
- Civil Works
- Mechanical Works
- Mobile Technician & electronics
- Basic Mechanic Engine
- Professional Driving Licence
Spouse - Name
Melody Joy Castro
References
- Teressa Yap, 718 P. Paterno, Quiapo, Manila, Secretary, 09176289910
- Dondon Largavista, P4 Villa Luisa, Dasmarinas, Cavite, Analog Employee
- Hellen Balesteros, B20-L3 Bautista Property Sampalok IV Zone 2, Dasmarinas, Cavite, 09559037836
Additional Information
010512211904, 3393878580, 288577111, 1210-0682-6915
Personal Information
- Age: 45
- Height: 5'3
- Weight: 167 Lbs.
- Citizenship: Filipino
- Father's Name: Gallano Corbito
- Mother's Name: Maria Alvarez
- Child Name: John Carl Corbito
- Child Name: Mark Joseph Castro
- Child Name: Al-Jhay Corbito
- Date of Birth: 06/14/79
- Gender: Male
- Religion: Catholic
Languages
English
First Language
Timeline
Technical Supervisor
JobLink Business Solution
08.2023 - 01.2024
Site Engineer
JJB EERS
01.2022 - Current
Master Electrician
Colliers International
06.2018 - 03.2023
Electrician/Line Guard Substation/AC Tech
Atalian Global Services-PNB Head Office
04.2015 - 06.2018
Electrician
Hypervolt Inc.
03.2012 - 10.2013
Electrician
Gigatech Inc.
07.2011 - 03.2012
Electrician
Topnet Electrical and Cable Installation
12.2009 - 10.2010
Electrician
A.V.R.B. Electrical Contracting
01.2006 - 09.2009
Bachelor of Science - Electrical Engineer (BSEE) ATEEAP
Manuel S. Enverga University Foundation
Vocational - Automotive and Electronics, Welding and Wiring Installation
Torres High School
Secondary -
Ramon Avancena High School
Primary -
Trinidad Tecson Elementary School