Jessalyn Pagarigan
Technician
Calamba City
Summary
Detail-oriented team player with strong organizational skills. Ability to handle multiple projects simultaneously with a high degree of accuracy. Organized and dependable candidate successful at managing multiple priorities with a positive attitude. Willingness to take on added responsibilities to meet team goals.
Overview
16
16
years of professional experience
11
11
years of post-secondary education
1
1
Certification
Work History
Equipment Maintenance Technician II
Analog Devices
10.2022
- Monitor equipment in the area and be familiar with equipment and process-related issues within the module
- Communicating findings to their peers and engineers
- Making recommendations to improve practices within their area of the factory
- Employ basic statistical process control concepts to troubleshoot and monitor the health of equipment in their area
- Troubleshooting to the component level when necessary
- Employing strong attention to detail, including documentation of actions and observation regarding the equipment
- Following all safety procedures and expectations when working on equipment in the clean room
- Inspect completed components for accuracy and functionality
- Perform various other duties and activities as assigned by the supervisor within the physical constraints of the job
- All soldering work is done under or non-microscope.
Probe Hardware Technician
Allegro Microsystems
02.2020 - 10.2022
- To ensure a healthy probe card inventory to support production committed targets
- To do repair on probe cards consisting of multiple fine pins
- Check and ensure the quality of the probe cards
- Able to use and operate some measuring equipment
- Work closely with probe card, process, and product engineer to troubleshoot probe card-related issues
- Recommend and execute corrective actions relating to the probe card
- Perform preventative maintenance and in-house repair of probe cards, load boards, and other test hardware
- Assist and work with vendors to facilitate new builds, repairs, or replacements
- Effectively troubleshoot HW using electronic instruments, and electrical interconnect.
Equipment Maintenance Technician
Microchip Technology Operations (Philippines) Corporations
03.2014 - 02.2020
- Provides test operations with the necessary technical support required to sustain the efficient operation of test production line
- Set up equipment as required by manufacturing
- Maintain and ensure all test equipment is in good condition prior set-up to production
- Performs troubleshooting and repair of test handlers
- Performs periodic equipment checks for the purpose of preventing the occurrence of untimely breakdowns
- Ensures adequate inventory of spare parts for repair maintenance of equipment
- Perform and assist research and implement improvements, modifications, and projects that will help to attain good efficiency and performance of the machines
- Ensures compliance to quality systems by complying with procedures and specifications affecting finishing operations e.g., control plan, setup control, correlation procedures, preventive maintenance procedure, and other related procedures/ specifications
- Participates in quality systems audit(s)
- Maintain a proper housekeeping test maintenance operation
- Support the company's vision and philosophies
- Performed involvement in the quality program circle of the company such as CIT and other related company activities
- Compliance with company rules and regulations
- Generates shift accomplishment/ report
- Perform other duties that may be assigned from time to time
- Own shutdowns and startups during all facility activities on all affected semiconductor equipment
- Use Statistical Process Control (SPC) to troubleshoot and determine the health of tools in the area.
Machine Operator
ACP Test Company Inc.
09.2010 - 03.2014
- Receive incoming documents, identifying and organizing documents by type
- Setting up machines to start a production cycle
- Controlling and adjusting minor machine settings (e.g., speed) Responsible for monitoring yields of wafers and PM/CAL due dates of tester and prober
- Fix issues that might occur during the shift
- Correct problems in set-up, non-conformance, tooling, and machining processes
- Assist in the training of trainee operators and operators
- Ask for input when needed to make the best decisions possible
- Follow safety guidelines and utilize appropriate safety devices when performing all operations
- Monitoring of defective and good hardware for production setup
- Ensure and organize the proper location of hardware
- Perform inventory control
- Knowledgeable in assembling cable wires
- Basic operation on PRVX
- Receiving incoming and outgoing materials (probe cards, electronic parts).
Production Operator
Stone Technology Philippine Inc.
08.2009 - 04.2010
- Responsible for obtaining correct labels and stickers for each ticket needed to fulfill the order
- Checked to make sure lot numbers, label numbers, and cap numbers are all correct
- Perform a functional test of the handset using RF test equipment and PC in order to ascertain the nature of the defect/s (where applicable) Installation of software upgrades
Data Encoder
University of Perpetual Help System-DALTA
03.2009 - 04.2009
- Encodes information from department forms into the data system to ensure information is accurately processed
- Verifies specified jobs to detect and correct possible encoding or other errors to ensure data is error-free
- Maintaining databases and client files, managing hard copies, scanning documents, and handling other data-related tasks.
Production Operator
Fujitsu Computer Product Corporation of the Philippines
09.2006 - 02.2007
- Read and follow job orders
- Determine the required materials and products
- Check output to spot any machine-related mistakes or flaws
- Keep records of approved and defective units or final products
- Maintain activity logs.
Education
Tertiary -
University of Perpetual Help System – DALTA
Calamba City, Laguna 06.2007 - 04.2009
Secondary -
Camp Vicente Lim National High school
Canlubang, Calamba City 06.2002 - 03.2006
Primary -
Jose Rizal Memorial Elementary School
Calamba City, Laguna 06.1996 - 03.2002
Skills
Team playerBasic electronic knowledgeKnowledge of proper usage of tools and test instruments (ie, DMM, Motorized XYZ Microscope, digital caliper measuring, dial gauge)Computer skillsSoldering skillsAble to communicate effectively
Safety Procedures
Analytical and Critical Thinking
Multitasking Abilities
Teamwork and Collaboration
Active Listening
Daily cleaning and sanitation
Certification
I hereby certify that the facts contained in this resume are true and complete to the best of my knowledge.
Personal Information
- Age: 33
- Height: 5'1"
- Weight: 73 kg
- Date of Birth: 12/07/89
- Gender: Female
- Nationality: Filipino
- Marital Status: Single
- Religion: Catholic
Applicant Name
Jessalyn M. Pagarigan
References
Available upon request
Timeline
Equipment Maintenance Technician II
Analog Devices
10.2022
Probe Hardware Technician
Allegro Microsystems
02.2020 - 10.2022
Equipment Maintenance Technician
Microchip Technology Operations (Philippines) Corporations
03.2014 - 02.2020
Machine Operator
ACP Test Company Inc.
09.2010 - 03.2014
Production Operator
Stone Technology Philippine Inc.
08.2009 - 04.2010
Data Encoder
University of Perpetual Help System-DALTA
03.2009 - 04.2009
Tertiary -
University of Perpetual Help System – DALTA
06.2007 - 04.2009
Production Operator
Fujitsu Computer Product Corporation of the Philippines
09.2006 - 02.2007
Secondary -
Camp Vicente Lim National High school
06.2002 - 03.2006
Primary -
Jose Rizal Memorial Elementary School
06.1996 - 03.2002