James Loquillano
Machine Shop Technology
Ayala, Zamboanga City, Seaman Book
Summary
To achieve a fulfilling career from which I can draw sufficient skills and knowledge to aide my quest for professional and personal success. PROFESSIONAL PROFILE : Dedicated and skilled Machinist with thirty three years of experience operating milling Machine, Lathe Machines, Cylindrical Grinder, Lapping Machine, Radial Drilling Machine, Horizontal Boring Machine, Balancing Machine and Surface Grinder equipment used in manufacturing precision tools. Fully conversant with metallurgical terms. Proficient in gauge readings and indicators of operational machines. Able to plan, layout, setup and perform most machine operations and procedures including post production quality analysis. Capable of interpreting and executing mechanical plans, reading technical drawings, drafts and sketches.
Overview
32
32
years of professional experience
6
6
Language
2
2
years of post-secondary education
Work History
Workshop Supervisor
Serba Dinamik Group
Bandar Penawar, Johor Baruh, Malaysia
03.2012 - 08.2022
- Maintained neat and clean work areas to maximize efficiency and safety.
- Controlled costs by effectively managing supplies and labor hours.
- Oversaw employee attendance record, handled payroll and ordered new materials for sites.
- Checked equipment to determine if maintenance was required.
- Kept team members on task with hands-on supervision and coaching.
- Implemented preventive, corrective and predictive maintenance policies
- Communicated daily with vendors to keep project fully operational.
- Reviewed project details to specify correct materials and equipment for job sites.
- Planned project resources by assigning funds, materials and staff throughout lifecycle of projects.
- Performing a high precision job of turbine internal and external parts and doing overhaul
of turbine to maintain the quality and performance for the offshore operations. - Performing a high precision job of offshore Crude Oil Transfer Pump ( COTP ) internal
wear rings, shaft and all offshore water pumps spare parts. - Performing a high precision job of Shell offshore drilling equipment like cross over, pipe line ring gasket and other related jobs for the offshore operations.
- Performing Balancing of electric motor rotor, gas turbine rotor, steam turbine rotor and offshore pump rotor.
- Evaluated incoming materials for quality and amounts ordered.
- Wrote production reports to help senior leadership make accurate operational plans and decisions.
Machinist
Keppel Kazakhstan, Republic of Kazakhstan
Aktau, Kazakhstan, Mangestau, Kazakhstan
05.2009 - 01.2012
- Performing a high precision job of pipe rack skid rail slotted hole for oil piping on offshore operations and other related jobs for offshore needs
- Modify some old model machine shop equipment into automatic feeding mechanism
- Design and fabricate the mobile boring machine to facilitate on the yard boring jobs.
- Ran heavy duty lathes, boring machines, mills, planers and grinders to craft products.
- Studied daily work instruction, sketches, drawings, blueprints and manuals to determine dimensions and tolerances accurately.
- Calibrated machines to maintain required productivity levels and adherence to quality standards.
Machinist
Maju Engineering
Labuan, Malaysia, Sabbah
01.2005 - 05.2009
- Performing offshore jobs from clients in different offshore companies such as, Weatherford, Baker Hughes, Schlumberger, Shell, Petronas, BJ Oilwheel, Mega methanol, Petra and other offshore company, manufacture of different types of offshore drilling instruments and other related jobs from the said oil and gas company
- Manufacture of ship engine mechanism and engine parts for the ship rehabilitation and repair.
- Ran heavy duty lathes, boring machines, mills, planers and grinders to craft products.
- Lubricated parts and performed minor and preventive maintenance to improve machine function and increase lifespan.
Tool and Die Maker / Machinist
Miramar Fish Company
Zamboanga City, Zamboanga Del Sur
01.1998 - 12.2004
- Performing a high precision Dies and Mold and doing heat treatment of Can Plant press machine Dies such as blanking punch, die ring, die core, punch core, draw pins, trimmer cutter, shearing cutter and also manufactured die shoe, seaming chuck, spur gear, bevel gear, helical gear, and other related jobs for the Can plant operations
- Re-design the draw reverse draw tooling and modify the deep drawn press machine from mechanical control into pneumatic control
- Rehabilitation and reconditioning of seamer machine, (Angelus, Continental and Canco Brand Seamer.
- Assembled and set various boring, slotting and turning heads.
- Calibrated machines to maintain required productivity levels and adherence to quality standards.
- Measured, examined or tested completed units to check for defects and verify conformance to specifications using precision instruments such as micrometers.
TOOL and Die maker / Machinist
Rowell Can Corporation
Quezon City, Manila, Manila, Philippines
07.1997 - 07.1998
- Performing a high precision job and heat treatment of draw reverse draw blanking punch, die core, punch core, die shoe, draw pins, shearing machine cutter, seaming chuck and other related jobs for press machine accessories
- Manufactured of three phase Can making machine spare parts and doing weekly maintenance
- Rehabilitation and reconditioning of seamer machine, (angelus, continental, john hein and canco brand seamer.)
- Manually set up machinery, lathes and grinders.
- Calibrated machines to maintain required productivity levels and adherence to quality standards.
- Lubricated parts and performed minor and preventive maintenance to improve machine function and increase lifespan.
Tool and Die maker / Machinist
Marfishing Company Inc
Zamboanga City, Zamboanga Del Sur
01.1991 - 07.1997
- Performing a high precision and heat treatment of all Can plant press machine accessories, blanking punch, die core, punch core, die shoe, draw pins, spur gear, bevel gear, helical gear and doing maintenance works every end of the month
- Fabrication and machining of Fishing boat engine spare parts of Mar Fishing Company Inc
- Fleet division.
- Calibrated machines to maintain required productivity levels and adherence to quality standards.
- Ran heavy duty lathes, boring machines, mills, planers and grinders to craft products.
- Lubricated parts and performed minor and preventive maintenance to improve machine function and increase lifespan.
- Measured, examined or tested completed units to check for defects and verify conformance to specifications using precision instruments such as micrometers.
Education
No Degree - Machine Shop Technology
Del Monte Philippines Technical School
Camp Phillips Bukidnon, Philippines 06.1987 - 03.1989
No Degree - High School
Immaculate Conception High School
Pitogo Zamboanga Del Sur, Philippines 04.2001 -
No Degree - Primary School
Balongbalong Elementary School
Balongbalong Pitogo Zamboanga Del Sur, Philippines 04.2001 -
Skills
Core Skillsundefined
Work Availability
monday
tuesday
wednesday
thursday
friday
saturday
sunday
morning
afternoon
evening
swipe to browse
Timeline
Workshop Supervisor
Serba Dinamik Group
03.2012 - 08.2022
Machinist
Keppel Kazakhstan, Republic of Kazakhstan
05.2009 - 01.2012
Machinist
Maju Engineering
01.2005 - 05.2009
No Degree - High School
Immaculate Conception High School
04.2001 -
No Degree - Primary School
Balongbalong Elementary School
04.2001 -
Tool and Die Maker / Machinist
Miramar Fish Company
01.1998 - 12.2004
TOOL and Die maker / Machinist
Rowell Can Corporation
07.1997 - 07.1998
Tool and Die maker / Machinist
Marfishing Company Inc
01.1991 - 07.1997
No Degree - Machine Shop Technology
Del Monte Philippines Technical School
06.1987 - 03.1989
Similar Profiles
Asep Mokhamad Romandani, ST Asep Mokhamad Romandani, ST null
Senior Project Manager at PT Serba Dinamik Indonesia, Subsidiary Of Serba Dinamik SDn.BhdSenior Project Manager at PT Serba Dinamik Indonesia, Subsidiary Of Serba Dinamik SDn.Bhd
Ronald TampubolonRonald Tampubolon
Team Leader Sysdev at PT. HARMONI DINAMIK INDONESIATeam Leader Sysdev at PT. HARMONI DINAMIK INDONESIA
Abdullatif KeskinAbdullatif Keskin
Sales Manager at In 1998, I Started Working at Dinamik Otomotiv, onSales Manager at In 1998, I Started Working at Dinamik Otomotiv, on
Johnathon VoglerJohnathon Vogler
Builder at US Navy Seabees ReservesBuilder at US Navy Seabees Reserves
Chris EdingfieldChris Edingfield
Grain Merchandiser at Winchester Ag Service INC.Grain Merchandiser at Winchester Ag Service INC.