JAMES I. PEÑERA
San Manuel
Summary
Dedicated Electrical Engineer with hands-on experience in electrical system and instrumentation controls of various powerplant, specializing in testing & commissioning, data analysis, operation & maintenance. Seeking a professional role where I can utilize my field of study, share and at the same time cultivate my humble knowledge in order to expand my understanding of chosen discipline. Aiming to grow intellectually, morally, and emotionally.
Overview
7
7
years of professional experience
1
1
Certification
Work History
Test Diagnostics & Analytics Engineer
ABOITIZ POWER CORPORATION - Hedcor Group
Luzon, Philippines
10.2024 - Current
- Responsible for Reliability, Engineering and Asset Management
- Area of Responsibility
- Bakun AC Hydro (74.80MW), La Trinidad Hydro (20.4MW), Sabangan Hydro (14.96MW), Irisan 1 Hydro (3.8MW), Irisan 3 Hydro (1.2MW), FLS Hydro (6.4MW), Sal-Angan Hydro (2.4MW), Ampohaw Hydro (8MW), Lower Labay Hydro (2.4MW), Lon-Oy Hydro (3.6MW), Bineng 3 Hydro (5.6MW), Cayanga Solar (75MWp), Laoag 1 & Laoag 2 Solar (130MWp), San Manuel Solar (67MWp), Armenia Solar (45MWp), Olongapo Solar (212MWp), Labay Main Substation, Banengbeng Main Substation, Asin Main Substation, etc.
- Testing & Commissioning of Transformers
- Performed electrical testing and analysis of Power Transformers, Medium Voltage Switchgear Transformers, Auxiliary Transformers, Station/Distribution Transformers using Omicron CPC 100, ISA, Doble, Transport X2 GE, Megger & Fluke to conduct over-all insulation power factor(IPF), excitation current, transformer turns-ratio(TTR), winding resistance(WR), insulation resistance(IR), polarization index (PI), Polarity Test (additive or subtractive), bushing hot-collar (C1&C2), dissolved gas analysis(DGA), oil dielectric breakdown voltage(DBV), oil sampling & paper sampling for furan test, sweep frequency response analysis (SFRA), Oil filtration for condition based monitoring, predictive maintenance, preventive maintenance & corrective maintenance.
- Performed electrical testing and analysis of circuit breakers using Doble CBA 1000 to conduct dynamic resistance, static resistance, contact resistance, bounce test, timing test & motion analyzer, insulation resistance & functionality test for condition-based monitoring, predictive maintenance, preventive maintenance & corrective maintenance.
- Performed electrical testing and analysis of Generator using ADX by Megger Baker Instruments to conduct surge test, partial discharge, winding resistance, insulation resistance & polarization index for condition-based monitoring, predictive maintenance, preventive maintenance & corrective maintenance.
- Performed electrical testing of instrument transformer (CT&PT) using STS4000 by Isa to conduct knee-point voltage or excitation curve for condition-based monitoring, predictive maintenance, preventive maintenance & corrective maintenance.
- Performed electrical testing of Capacitor Banks using megger and fluke clamp meter to conduct insulation resistance test, charging verification test to identify potential problem for condition-based monitoring, predictive maintenance, preventive maintenance & corrective maintenance.
- Conduct Thermal Imaging of transformers, generators, isolators or disconnecting switches, instrument transformers (CT&PT), control panels, high & low voltage cables, etc. using Infrared Cameras (Fluke TIS20+/Flir) to detect hotspots or potential failure for condition-based monitoring, predictive maintenance, preventive maintenance & corrective maintenance.
- Responsible for testing and commissioning on newly rewind transformers, operates oil-degassifier for oil purification, performed electrical testing after setting and before soaking, prepared PressMat prior to energization, provides pre & post energization checklist and feedbacks on system back to service. Acted as a Quality Inspector for newly rewind and during internal inspections(un-tanking) on transformers by performing in-process and final inspections, verifications and documentations, interpretations of engineering drawings, wiring diagrams, technical specifications and collaboration to third parties/contractors to ensure assets meet quality standards and specifications.
- Provide testing plans & reports, trend analysis using looker studio, findings & recommendations, risk management plan, corrective action plans and participated on meeting with stakeholders, customers (O&M), third parties, contractors, etc. to identify area of potential risk, customer issue, strategic plan, project execution and progress.
Instrumentation & Control Maintenance
SAN ROQUE POWER CORPORATION (SRPC)
01.2024 - 10.2024
- Performed preventive, predictive and corrective maintenance on plant instruments to maintain efficient, safe and reliable operation.
- Overhauling of 3-150MVA Generator:
- Performed calibration and maintenance of instruments namely: pressure gauges, pressure switches & transmitters, RTD’s, thermocouples, temperature indicating switches & controllers, oil level indicating switches, air coolers, flowmeters, panel voltmeters, proximity sensors, directional valves, transducers, relays, contactors, solid state timers and others.
- Design and implementation of control circuit for the hydraulic power unit used for testing directional control valves.
- Maintenance and testing of several plant systems namely Governor System, Excitation System, Cooling Systems and others.
- Hands-on experience in standard instruments used for simulation and calibration such as relay testers, PQ analyzer, signal oscilloscope, pressure comparators (for oil, air, and water), thermal camera, vibration analyzer, resistance box, digital multi-tester and others.
- Assists supervisor in vibration monitoring and analysis, as well as thermography of plant equipment.
- Conducted comprehensive capacity test of fire pump and spillway gate to ensure optimal performance and compliance with safety standards.
- Conducted the unit 3 excitation system upgrade:
- Performed disassembly and assembly of hardware components.
- Performed IR test and loop check of control cables and power supplies prior to termination.
- Reviewed and interpret technical drawings to extract and apply detailed specifications, design requirements and operational guidelines.
- Conduct pre-commissioning test with commissioning engineer, including both offline and online test
- Familiar with Generator Capability Curve
Cadet Electrical Engineer
SAN ROQUE POWER CORPORATION (SRPC)
05.2023 - 11.2023
- Performed preventive, predictive and corrective maintenance of plant electrical systems to maintain efficient, safe and reliable operation.
- Overhauling of 3-150MVA Generator:
- Performed IR test and PI test of circuit breakers and transformers utilizing a Megger Test.
- Performed pole drop test, white band mapping, maintenance of brush contact, stator & rotor parts of the generator.
- Performed grounding test of plant grounding system utilizing a digital ground resistance tester and low ohmmeter resistance tester.
- Conduct maintenance of 3-166 MVA Transformer, IPB, disconnecting switches, insulators and others at the switchyard with our service providers.
- Conduct full speed no load test of the generating unit with our Plant Operators.
- Performed maintenance of 700KW Emergency Startup Diesel Generator and flushing of fire hydrants.
- Performed maintenance of Powerhouse Elevator with our service providers.
- Performed maintenance of diesel generators at various plant location such as spillway, LLO, tailrace, medics, attics & galleries.
- Performed lighting maintenance of the plant, replaced ballasts including capacitors & ignitors, servicing of photo switch sensors, upgrade conventional lightings into LED and servicing of emergency lights & exit signs.
- Conduct maintenance and annual audit of FDAS & Deluge System, smoke detectors, fire control panels and Inergen Fire Suppression System of the plant with our service providers.
- Performed troubleshooting and repair of defective electrical components of the plant such as circuit breakers, relays, solid state timers, contactors and others.
Jr. Electrical Contractor
Self-Employed
12.2021 - 12.2022
- Leading small teams working on smaller projects with field services include planning and installation of electrical systems in newly constructed residence houses and troubleshooting and repair of existing installations.
- Communicated with clients to ensure that their needs and requirements were always fully met.
- Produced and reviewed blueprints and completed lighting system & small power design.
- Providing cost estimates of electrical projects, including equipment and labor cost.
- Wiring and Installation of Fire Detection Alarm System.
Apprentice Electrician
RTJ ELECTRIC SUPPLIES AND ENGINEERING SERVICES – On-the-Job Training (OJT)
02.2019 - 02.2020
- Install, repair, and maintain residential electrical systems, including lighting fixtures, electrical panels, outlets, and wiring.
- Perform quality installations based on system design specifications, troubleshoot and repair faulty equipment and systems.
- Interpret blueprints, schematics, and diagrams.
- Take every opportunity to learn about system design, installations and code requirements.
Education
Bachelor of Science - Electrical Engineering
Urdaneta City University
Urdaneta City, Pangasinan01.2021
undefined
St. Mary’s Dominican School
Guise Norte, San Manuel, Pangasinan01.2015
undefined
Narra Elementary School
Narra, San Manuel, Pangasinan01.2011
Skills
- Basic Computer Fundamentals
- Application Design (AutoCAD)
- Office Application (MS Word, MS Excel, MS PowerPoint)
- Electrical Installation and Maintenance
- Installation of Fire Detection Alarm System (FDAS)
- Motor Control
- Safety Management
Affiliations
Institute of Integrated Electrical Engineers of the Philippines, Inc. (IIEE)
Certification
- REGISTERED ELECTRICAL ENGINEER: Registration No. 0081111
- Passed, September 2022 Registered Electrical Engineer Licensure Examination conducted by the Professional Regulatory Commission at Rosales, Pangasinan.
- REGISTERED MASTER ELECTRICIAN: Registration No. 0067159
- Passed, September 2022 Registered Master Electrician Licensure Examination conducted by the Professional Regulatory Commission at Rosales, Pangasinan.
PERSONAL INFORMATION
English
Tagalog
Ilocano
Timeline
Test Diagnostics & Analytics Engineer
ABOITIZ POWER CORPORATION - Hedcor Group
10.2024 - Current
Instrumentation & Control Maintenance
SAN ROQUE POWER CORPORATION (SRPC)
01.2024 - 10.2024
Cadet Electrical Engineer
SAN ROQUE POWER CORPORATION (SRPC)
05.2023 - 11.2023
Jr. Electrical Contractor
Self-Employed
12.2021 - 12.2022
Apprentice Electrician
RTJ ELECTRIC SUPPLIES AND ENGINEERING SERVICES – On-the-Job Training (OJT)
02.2019 - 02.2020
undefined
St. Mary’s Dominican School
undefined
Narra Elementary School
Bachelor of Science - Electrical Engineering
Urdaneta City University
TRAININGS
- Electrical Installation and Maintenance - NC II (October 25, 2022 - November 25, 2022) TESDA-Luciano Millan Memorial School of Arts and Trades – Asingan, Pangasinan
- Basic Occupational Safety and Health - BOSH (May 19-23, 2021) AVIETCS Training and Consultancy Service – Urdaneta City, Pangasinan DOLE-OSHC Accreditation No. 1030-101818-094
- Hazard Identification Risk Assessment and Risk Control - HIRAC (January 28, 2020) AVIETCS Training and Consultancy Service – Urdaneta City, Pangasinan DOLE-OSHC Accreditation No. 1030-101818-094
- ABB Excitation System Basic Operation and Maintenance Training (August 19-20, 2024) Lim Tzyy Shyang – ABB Senior Service Engineer
Disclaimer
I hereby certify that the above information is true and correct to the best of my knowledge and belief.