Ferdinand C. Corpuz
Mabalacat
Summary
Aim to work hard in a real corporate environment, which would help me to improve my personality traits and be creative in using my skills and proficiency in the best possible way to achieve professional excellence and be an asset to the organization enabling mutual growth effectiveness.
Over 18 years of experience in Power Plant Operation and Maintenance, Water Generation, Start-up /Shutdown, Commissioning, Troubleshooting, Operation, and maintenance of Steam and Gas turbines. Combine Cycle Power Plant and desalination projects in the Middle East and North Africa, Coal fired thermal Power Plants in Turkey, Vietnam, and the Philippines. Oil and Gas Electrical Commissioning in Kuwait, Qatar, and Algeria, Knowledge in PTW, H2S, SCBA, and Authorized Gas testing, safety training oriented a multi-skilled maintenance engineer Electrical and Mechanical.
Overview
13
13
years of professional experience
Work History
Electrical Staff
Black Construction Corporation
Barrigada
06.2021 - 05.2025
- Generally responsible for monitoring all electrical-related works on the site.
- Provide engineering and technical support to all the electrical work groups at the site.
- Executing plans for electrical components. Install panel and conduit wiring of Andersen safety Automatic gates and pop-up barriers, duck bank conduit layout.
- Commissioning, Troubleshooting, and repairing Automatic gates and Pop-up barriers, electric motors, transformers, MV/LV Switchgear, generators, and Other electromechanical equipment.
- Coordinates with Client / Consultant's representatives for any site instructions and inspection of works.
- Improved electrical system efficiency by identifying and repairing faulty wiring and equipment.
- Diagnosed electrical issues using advanced testing equipment to ensure optimal performance.
- Supported team productivity by managing inventory levels of tools, equipment, and materials needed for daily tasks.
Electrical Engineer/Commissioning/O&M/QA/QC
Schlumberger Oilfield Eastern LTD
East Raudhatain
03.2018 - 11.2019
- Generally responsible for the monitoring of all electrical-related works at the site.
- Provide engineering and technical support to all the electrical work groups at the site.
- Coordinates with Client / Consultant's representatives for any site instructions and inspection of works.
- Performed Commissioning protection test and trip test of Transformers, HV Switchgear, ACB, and MCCB using a testing instrument.
- Responsible for monitoring and taking necessary actions to sustain the continuous and safe operation of the Substations.
- Attend daily meetings to update clients. Compiling system/sub-system ITR'S paperwork as required.
- To undertake fault-finding and diagnostic activities including fault rectification.
- Assign targets for accomplishments and ensure targets are met daily for all electrical groups at the site.
- Performs other related duties as may be required by the project site manager.
- Directly responsible for the safety of all electrical groups' personnel of the project by ensuring that the project execution will be done according to all applicable health, safety, sanitary, and environmental standards.
- To help develop operational procedures for the designated areas.
- To contribute to ensuring pre-commissioning/commissioning activities. Punch listing.
- Ensure that all activities in the day-to-day operation are carried out in a manner safe for personnel and equipment and minimize the impact on the environment.
- General housekeeping, isolation, and preparation of equipment for maintenance.
- Preparation, start-up, parallel, and changeover of generators.
- Plan and execute inspections and monitor all Electrical Pre-Commissioning activities and loop Checking.
- Responsible for operation and maintenance and switching operation of GTG 3.3KV/0.4KV at Substations and ATS Changeover of HV/LV SWGR and Transformers.
- Participates in regular meetings with the Construction team for Pre-Commissioning & Commissioning activities.
- Ability to work within a multi-disciplinary team to achieve successful installation and Commissioning of major projects.
- Participates in raising non-conformance reports/corrective action required /Defects or punch list items. Prepares and manages system punch lists, monitors defect rectification and liaises with the Commissioning Team to achieve safe and timely start-up of facilities.
- Reports to the E&I Site Superintendent or E&I Project Engineer as appropriate.
- QA/QC of the Electrical, as per the Project Specification and requirements.
- Carry out any non-contractor obligation ATEX inspections as per Project requirements.
- Act as a third-party inspectorate, sample checking contractor, and vendor ATEX inspections to ensure compliance.
- Ensuring that Contractors / Sub-Contractors comply with the QA/QC requirements, testing, and reporting as per the Project Standards and Requirements.
- Ensure all work, tests, and inspections undertaken by the Contractor are by the Specifications/Contract Requirements and sign the relevant Test Certificates.
- Review contractor and Vendor QA/QC Documentation and design deliverables and confirm accordance with relevant International and Project Specifications.
- To implement and ensure Quality Assurance and Quality Control in the field of Electrical, Instrumentation as per the Project requirements, Project Specifications, Standards, and Codes.
- To ensure that the Contractor / Subcontractor follows the project quality requirements during the construction of the project.
- Project Specification: EPF Facility at East Raudhatain Based onshore on new facility (EPF) early production facility, Plant consisting of VRU / MRU / SRU/ CRUDE / SOUR GAS, 2 x MV/LV Substations / Central control room / 4 LER'S (Local Equipment Room), 4x 4MW solar turbines 3.3KV/440v switchgear / AC/DC UPS systems / HV/LV drives VFD / Soft starters / HVAC.
Shift Operation Leader
Marubeni Corp & Fuji Electric Co. LTD
Thai Binh
04.2017 - 12.2017
- Work as Shift Leader under the overall Commissioning Management Team.
- Prepare a plan of Shift Operation.
- Supervise and oversee daily plant operations and maintenance in the operation shift team to ensure that operational targets are achieved safely, efficiently, and within the company rules and procedures, O&M guidelines, legal, environmental, contractual, and other requirements.
- Responsible for the safe, reliable, and efficient operation including start-up and shutdown of the Power Plant, Steam turbine, the balance of plant equipment and its auxiliaries by the plant policies, Operation Department, policies, or other tasks directed by the Shift Superintendent, Shift Supervisor.
- Assist in establishing the appropriate procedures and computerized maintenance management processes as applicable to prudent operation management, the permit-to-work system.
- Operate the plant safely in line with the requirements of National Dispatch.
- Continuously improve systems and procedures based on experience.
- Understands and adheres to all Plant Safety Guidelines and Procedures.
- Strives to maintain an injury-free environment.
- Understands and masters the Plant Emergency Handling Procedures.
- Ensures control of the plant process and electrical distribution through the plant Distributed Control System (DCS) and other process control devices.
- Assists in scheduling daily maintenance actions, plant configuration changes, and varying power generation levels.
- Monitors plant chemistry and chemical handling.
- Identifies problems with plant equipment and communicates the conditions associated with these problems to the Shift Engineer / Plant Maintenance Team.
- Ensures the completion of shift round checklists, routine daily/weekly/monthly test checklists equipment change-over checklists, etc.
- Responsible for the generation and sending of the Plant's daily data requirements promptly to all applicable parties.
- Operate the control system of the power plant substation equipment and HV/LV switchgear during plant maintenance activities, emergencies, or as required.
- Assist in the implementation of company policies, safety procedures (proper 'Lock-out/Tag-out' procedures and other safety procedures), good housekeeping, energy conservation guidelines, and environmental regulation.
- Project Specifications: 1. Boiler: Amec Foster Wheeler, 2. STG: Fuji Electric Co, LTD. 3. FGD: Kawasaki. Specification: Pulverized coal arch fired, Anthracite firing, Natural Circulation Reheat Steam Generator, MSP:16.67MPa, MST:540deg, RHST: 538deg.RHSP: 4.011MPa, Exhaust Press: 6.5KPa, Steam Turbine: Rated Out Put: 300MW, 3000RPM, Reaction reheat Condensing Type.
Shift Operation Leader
MITSUBISHI CORPORATION
03.2016 - 03.2017
- Work as Shift Leader under the overall Commissioning Management Team.
- Prepare a plan of Shift Operation.
- Supervise and oversee daily plant operations and maintenance in the operation shift team to ensure that operational targets are achieved safely, efficiently, and within the company rules and procedures, O&M guidelines, legal, environmental, contractual, and other requirements.
- Responsible for the safe, reliable, and efficient operation including start-up and shutdown of the Power Plant, Steam turbine, the balance of plant equipment and its auxiliaries by the plant policies, Operation Department, policies, or other tasks directed by the Shift Superintendent, Shift Supervisor.
- Responsible for the generation and sending of the Plant's daily data requirements promptly to all applicable parties.
- Operate the control system of the power plant substation equipment and HV/LV switchgear during plant maintenance activities, emergencies, or as required.
- Assist in establishing the appropriate procedures and computerized maintenance management processes as applicable to prudent operation management, and permit-to-work system.
- Operate the plant safely in line with the requirements of National Dispatch.
- Continuously improve systems and procedures based on experience.
- Understands and adheres to all Plant Safety Guidelines and Procedures.
- Strives to maintain an injury-free environment.
- Understands and masters the Plant Emergency Handling Procedures.
- Ensures control of the plant process and electrical distribution through the plant Distributed Control System (DCS) and other process control devices.
- Assists in scheduling daily maintenance actions, plant configuration changes, and varying power generation levels.
- Monitors plant chemistry and chemical handling.
- Identifies problems with plant equipment and communicates the conditions associated with these problems to the Shift Engineer / Plant Maintenance Team.
- Ensures the completion of shift round checklists, routine daily/weekly/monthly test checklists equipment change-over checklists, etc.
- Assist in the implementation of company policies, safety procedures (proper 'Lock-out/Tag-out' procedures and other safety procedures), good housekeeping, energy conservation guidelines, and environmental regulation.
- Project Specifications: GE Steam Turbine Generator with a base load capacity of 55 MW (3 units a Circulating Fluidized Bed Combustion Boiler capacity of 220 Tons per hour of superheated steam capacity and 520 C reheated steam, comprised of 2 hot gas generator bed firing start-up burners with both HFO and LFO injection.
Electrical Commissioning Engineer
SK ENGINEERING & CONSTRUCTION
Tufanbeyli Town, Adana Province
02.2015 - 02.2016
- Assigned for the commissioning of the 3 x 150 MW Thermal Power Plant (coal-fired) project handling commissioning jobs and activities for the Circulating Fluidized Bed Combustion Boiler and its auxiliaries such as combined induced draft fans, primary and secondary air fans, hot cyclone, and loop seal air blowers limestone slurry preparation system and auxiliaries coal handling and fly ash handling system, condensate system with condensate air removal, Gland Steam Condenser, LP and HP Feed water Air Heaters and condensate polishing plant, dry cooling system, electrostatic precipitator, selective non-catalytic reduction (SNCR)system, Flue Gas Desulfurization System with absorber recirculation pumps and ME Washing Water Pumps, Circulating Water Pumps with Recovery Turbine and Water Treatment Plant & Waste Water Treatment System.
- Test and Commissioning of ABB 6.3kV - 400 V MEDIUM VOLTAGE SWITCHGEAR including MICOM (Schneider) Multi-function Protection Relay.
- Commissioning of ABB Low Voltage Switchgear including Vacuum Circuit Breaker (VD4 VCB).
- Commissioning of 6.3KV/ 400V MCC (Motor Control Center) of Control building and Industrial System.
- Responsible for the preparation of the following commissioning check sheets and doing an internal and initial test before the preparation of the functional Test which is given a request notification to the client one day before the function test of the system.
- Pre-commissioning works and inspection of all electrical and instrumentation packages, loop checking, and inspection of equipment ensuring compliance with industry standards.
- Testing and commissioning of all the motors and pumps in the entire plant.
- Review Electrical commissioning plans, prepare/formulate commissioning procedures and other documents for CFBC Boiler System and auxiliaries, and BOP Systems which include; Limestone Slurry Preparation System, Circulating Water System, Water Treatment System, Dry Cooling Tower System, FGD System, Sump Pump System, HFO and LFO System, PA and SA System, Raw Water System, Service & DM Distribution Water System, Feed water System, Condensate System, Coal Handling and Fly Ash Handling System, ESP System, Soot blowing System, Limestone Transfer, and Limestone Slurry Preparation System and Waste Water and Sewage Treatment System.
- Perform system walk down & prepare punch and remaining items in the plant.
- Project Specifications: Siemens Steam Turbine Generator with a base load capacity of 450 MW (3 units a Circulating Fluidized Bed Combustion Boiler capacity of 463 Tons per hour of superheated steam capacity and 424 tons per hour reheated steam, comprised of 8 burner bed firing start up with both HFO and LFO injection.
Operation & Maintenance Coordinator
SPIE Oil & Gas Services
Ras Laffan Ship Yard Facility
04.2014 - 08.2014
- Responsible for continuously monitoring the Plant's critical streams to ensure balanced operation rates and optimum operation.
- Responsible for switching operation of RMUs in 34 units of substations 33KV/11KV Offshore & Onshore in HV/LV SWGR during the emergency and preventive maintenance shutdown to interchange the open point and return after completion of work.
- Provide maintenance and troubleshooting assistance in engineering facilities and issues safe PTW systems.
- Ensure clear guidelines are delivered to manage and reduce negative impact during power interruptions or emergencies.
- Investigate quality defects for root causes and help improve manufacturing system efficiency.
- Monitor productivity and activities to ensure they are compliant with the Environmental, Health, and Safety (EHS) guidelines.
- Relay production constraints to appropriate business and planning organization to provide accurate input to the production plan.
- Develop and maintain log sheets, equipment checklists, and other tools to track operation and maintenance.
- Submits KPI monthly reports and site daily reports, inspection requests, estimates, and all applicable monitoring reports regularly or as required. Keep equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures.
- Ensure adherence to all applicable regulations, policies, and procedures for health, safety, and environmental compliance.
- Experience with contractors and worldwide suppliers, those involved in the construction of major oil and gas facilities.
- Maintain professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks and participating in professional societies.
- Perform any job-related activities as requested immediately by the manager.
Electrical Engineer
SPIE Oil & Gas Services
Ras Laffan Ship Yard Facility
04.2012 - 04.2014
- Generally responsible for the implementation of the Method of Statement and monitoring of all electrical-related works at the site.
- Manages directly and provides engineering and technical support to all the electrical work groups at the site.
- Coordinates with Client / Consultant's representatives for any site instructions and inspection of works.
- Attending meetings with Clients and Colleagues to get a comprehensive understanding of any project-specific needs.
- Conducted detailed analyses of electrical designs, optimizing performance and reducing operational risks.
- Collaborated with multidisciplinary teams to integrate electrical solutions within large-scale infrastructure developments.
- Led troubleshooting efforts for complex electrical issues, improving system reliability and minimizing downtime.
- Developed and maintained project documentation, enhancing communication among stakeholders and supporting project execution.
- Mentored junior engineers in best practices for design processes and safety protocols, fostering professional growth within the team.
- Evaluated new technologies to enhance efficiency in electrical engineering practices, driving innovation across projects.
- Managed vendor relationships to ensure timely procurement of materials, aligning project timelines with operational needs.
- Performed maintenance procedures and repairs on existing electrical products and systems.
- Inspected completed installations to observe operations and verify conformance to design and equipment specifications.
- Successfully managed multiple projects simultaneously by setting clear goals, prioritizing tasks, and monitoring progress.
- Proposed electrical product and system modifications to improve quality and efficiency.
- Evaluated electrical installations and systems to isolate faults and implement corrective actions.
- Provided technical support to colleagues on complex issues, assisting them in finding efficient solutions to problems.
- Performed regular inspections of facilities to assess the condition of electrical systems and recommend necessary upgrades or maintenance activities.
- Reduced costs without compromising quality by utilizing cost-effective materials and innovative design techniques.
- Achieved significant improvements in electrical system safety, complying with national electrical codes and standards.
Education
Bachelor of Science - Electrical Engineering
Holy Angel University
Angeles City10.1989
Industrial Electricity - Industrial Electricity
Holy Angel University
Angeles City03.1984
Skills
- Power Plant Operation
- Control Room Operation
- Power and Water Generation
- DCS-Distributed Control System
- SCADA-Supervisory Control and Data Acquisition
- PLC-Programmable Logic Controller
- UPS-Uninterruptible Power Supply
- O&M-Operation and Maintenance
- Oil and gas
- Gas Turbine
- Steam Turbine
- HRSG Steam Generator
- Diesel Generator
- BSDG
- Balance of Plant BOP
- Water Treatment Plant
- Rotating Equipment's
- Soft Starter
- VFD
- HV and LV Switch Gear
- Power Transformers
- Air compressor
- HVAC
- Capacitor Bank
- Battery Charger
- Troubleshooting
- Communication and Organizational Skills
- Verbal and written communication
- Piping and Instrumentation schematic read and interpret
- Ability to work under pressure
- Independent decision
- Conflict resolution
- Teamwork
- Creativity
- Data Analysis
- Event planning
- Public relations
- Electromechanical repair
- Switchgear operation
- Electrical installation
- Electrical testing
- Electrical troubleshooting
- Low-voltage systems
- Conduit bending
- Wiring techniques
- Power distribution
- High voltage systems
- Electrical drafting
- National Electrical Code
- Motor controls
- Circuit analysis
- Variable frequency drives
- Fire alarm systems
- Surge protection
- Arc flash safety
- Hazardous location wiring
- Industrial automation
- Grounding techniques
- Control systems
- Instrumentation calibration
- Energy management
- PLC programming
- Transformer operations
- Lighting design
- Team player
- Hand and power tools
- Electrical installations
- Installation and repair specialist
- Power supplies
- Electrical experience
- Troubleshooting expert
- Electrical safety
- Lighting systems
- Willing to travel
- Welding
- Soldering skills
- Safety training
- Safety management
- Quality testing
- Strong mechanical aptitude
- Equipment troubleshooting
- Instrument Calibration
- User training
- Panel building
- Schematic interpretation
- Microsoft Windows expert
- AV and electronics repair
- Codes compliance
- Regulatory compliance
- Manual dexterity
- Schematics interpretation
Languages
English
Tagalog
Arabic basic
Personal Information
- Height: 5' 7"
- Weight: 82 Kg
- Passport Number: P9485369B
- Passport Date Of Issue: 04/02/22
- Passport Place Of Issue: PCG Agana, Guam
- Notice Period: Immediately
- Date of Birth: 01/26/69
- Nationality: Filipino
- Marital Status: Widow
Timeline
Electrical Staff
Black Construction Corporation
06.2021 - 05.2025
Electrical Engineer/Commissioning/O&M/QA/QC
Schlumberger Oilfield Eastern LTD
03.2018 - 11.2019
Shift Operation Leader
Marubeni Corp & Fuji Electric Co. LTD
04.2017 - 12.2017
Shift Operation Leader
MITSUBISHI CORPORATION
03.2016 - 03.2017
Electrical Commissioning Engineer
SK ENGINEERING & CONSTRUCTION
02.2015 - 02.2016
Operation & Maintenance Coordinator
SPIE Oil & Gas Services
04.2014 - 08.2014
Electrical Engineer
SPIE Oil & Gas Services
04.2012 - 04.2014
Bachelor of Science - Electrical Engineering
Holy Angel University
Industrial Electricity - Industrial Electricity
Holy Angel University
Similar Profiles
Brianna AsanoBrianna Asano
Project Administrative Assistant at Black Construction CorporationProject Administrative Assistant at Black Construction Corporation
MICHAEL TARRAYOMICHAEL TARRAYO
Spray Painter /Board Plasterer at Black Construction CorporationSpray Painter /Board Plasterer at Black Construction Corporation
Jianna SorianoJianna Soriano
Environmental Manager/ Specialist at Black Construction CorporationEnvironmental Manager/ Specialist at Black Construction Corporation
Erickson SalangsangErickson Salangsang
Senior Full Stack Developer at FreelanceSenior Full Stack Developer at Freelance
Antonio SalungaAntonio Salunga
Electronics Technician at United States Postal Office,USPSElectronics Technician at United States Postal Office,USPS