Edison Tomas
Product Engineer
Biñan, Province Of Laguna
Summary
Over ten(10) years of experience in the semiconductor test and product engineering in both development and manufacturing environment.
Results-driven product engineering professional prepared for high standards and impactful contributions. Extensive experience in driving product innovation and development. Known for collaborative teamwork and adaptability, excelling in design thinking and project management. Fast learner and can handle pressure, strong problem solving skills, forward thinker and thinks outside the box.
Overview
13
13
years of professional experience
6
6
Certifications
Work History
Senior Product Engineer
ONSemi Phils.
Carmona
08.2017 - Current
- Liaison for products under Automotive Application (ASCI and ASSP).
- Improved product quality/yield/test time with rigorous testing procedures, identifying areas for improvement and implementing corrective actions such as Test time improvement through analysis of non-failing test, complementary test and test method improvement. (e.g trim code search routine from full code sweep to linear approximation measurement, removal of high Cpk test parameters, etc).
- Spearheaded Product/Test/Process optimization initiatives, resulting in significant reductions in waste and resource consumption such as Site parallelism conversion (e.g 16 to 24 conversion) for throughput improvement, Test flow reduction/swapping. (e.g QC flow removal, Cold/Hot test transfer to probe, Final test Cold/Hot removal), Qualifies Fab, Assembly, Test and Probe transfer for space harvesting. (e.g Outsourcing mature products to subcon, insourcing products from in house ATO sites), and Au to Cu migration for product cost reduction.
- Implemented robust quality control measures that ensured consistent product performance across all units produced such as Part average testing to screen statistical outliers, evaluating new methodologies to prevent futures (i.e case study on implementing a ratio test to minimize ESD/EOS related RMA's).
- Developed manufacturing processes by studying product requirements and researching, designing, modifying and testing manufacturing methods.
- Established clear communication channels between engineering departments, fostering collaboration and efficiency in project execution.
- Led cross-functional teams to ensure seamless integration of new product releases, increasing overall customer satisfaction. Resolved technical issues promptly during both pre-and post-launch phases of a product''s life cycle, maintaining high levels of satisfaction throughout the entire user experience journey.
- Built and tested sample units to verify correct assembly, hardware, fit and function.
- Coordinated with sales teams to provide technical support during customer engagements, effectively addressing any concerns or inquiries related to product performance and capabilities.
- Championed continuous improvement initiatives within the engineering department by promoting a culture of learning and adaptation.
- Prepared product and process reports by collecting, analyzing, and summarizing data analysis and trends.
- Streamlined manufacturing processes by implementing lean principles, reducing production time and costs.
- Interpreted blueprints, technical drawings, schematics and computer-generated reports for product conformance with engineering design and performance specifications.
- Identified new ideas, products and/or features that improved customer satisfaction, reduced costs and kept product line in forefront of industry.
Product Development Engineer
Analog Devices Inc.
12.2015 - 08.2017
- Liaison for Digital-to-Analog Converter(DAC) products.
- Presented technical data and project updates at internal meetings, facilitating information sharing among team members.
- Conducted characterization of IC – performing bench measurements, thermal evaluation, data analysis, presenting results, and generating reports.
- Analyzed and interpreted data to identify trends and recommend improvements for cost analysis, yield improvements, and scrap avoidance.
- Performed complex calculations to analyze and optimize product performance during characterization and testing.
Product Engineer
Atmel Corporation(Now Microchip Technology Inc.)
02.2014 - 12.2015
- Liaison for Controller-Area-Network(CAN) bus and High-Voltage Driver products for Automotive application.
- Collaborated with cross-functional teams to ensure seamless integration of new product introduction release to manufacturing.
- Led continuous improvements in engineering, resulting in clearer product design standards, better manufacturability and reduced engineering cycle time.
- Implemented cost-saving measures throughout the production process without compromising on performance or quality.
- Acted as the Product engineering during 8D report completion of customer returns.
Test Engineer
Hitachi Global Storage Technologies (a WD Company)
Laguna
02.2012 - 02.2014
- Reviewed, evaluated, and identified requirements for testability.
- Collaborated with development teams to identify, reproduce, and resolve software issues promptly.
- Created comprehensive test plans, test scripts, and use cases to support testing objectives.
- Participated in planning, executing test cases, documenting results and defect improvement of new and existing test procedures to meet department OEE standards.
- Participated in audits, documenting highlighting opportunities for improvement.
- Reduced product defects by performing thorough root cause analysis and implementing corrective actions.
Education
Bachelor of Science - Electronic Engineering
Saint Louis University
Baguio City 04.2001 -
Master of Science - Micro Electronics
Mapua Institute of Technology
Manila 04.2001 -
NC2 Instrumentation And Controls
TESDA
01-2011
Green Belt - Six Sigma
HGST, A Western Digital Company
04.2001 -
Training - Introduction To Analog IC Design (PIIC Program)
University of The Philippines
Manila, Metro Manila, Philippines 04.2001 -
Training - Op Amp Design (PIIC Program)
University of The Philippines
Manila, Metro Manila, Philippines 04.2001 -
Training - Extended DISC, Dominance(D) Behavioral Style
ONsemi
Carmona, Province Of Cavite, Philippines 04.2001 -
Skills
Product development expertise
Prototyping and testing
Product lifecycle management
Simulation and modeling
Design of experiments
Six sigma methodologies
Mixed Signal Test Methologies
Data mining and Analytics
ATE Tester Aware
Decision-making
Verbal and written communication
Critical thinking
Certification
Licensed Electronics Engineer PRC License # 0049087(expired)
Timeline
Senior Product Engineer
ONSemi Phils.
08.2017 - Current
Product Development Engineer
Analog Devices Inc.
12.2015 - 08.2017
Product Engineer
Atmel Corporation(Now Microchip Technology Inc.)
02.2014 - 12.2015
Test Engineer
Hitachi Global Storage Technologies (a WD Company)
02.2012 - 02.2014
Bachelor of Science - Electronic Engineering
Saint Louis University
04.2001 -
Master of Science - Micro Electronics
Mapua Institute of Technology
04.2001 -
Green Belt - Six Sigma
HGST, A Western Digital Company
04.2001 -
Training - Introduction To Analog IC Design (PIIC Program)
University of The Philippines
04.2001 -
Training - Op Amp Design (PIIC Program)
University of The Philippines
04.2001 -
Training - Extended DISC, Dominance(D) Behavioral Style
ONsemi
04.2001 -
NC2 Instrumentation And Controls
TESDA
Similar Profiles
Armando Jr M. MagpantayArmando Jr M. Magpantay
Principal Product Engineer at ONSEMI PHILSPrincipal Product Engineer at ONSEMI PHILS
Noel RizaldeNoel Rizalde
Environmental Sustainability Manager at Fujifilm Business Innovation Phils. Corp (Formerly Fuji Xerox Phils., Inc.)Environmental Sustainability Manager at Fujifilm Business Innovation Phils. Corp (Formerly Fuji Xerox Phils., Inc.)
Anjana KrishnakumarAnjana Krishnakumar
Analog Verification Engineer at OnsemiAnalog Verification Engineer at Onsemi
Gemma GallardoGemma Gallardo
Call Center Representative at TeleservproCall Center Representative at Teleservpro
Christine Antonette GironChristine Antonette Giron
On Call Health Promotion Officer/ First Aider at DPWH Laguna 2nd District Engineering OfficeOn Call Health Promotion Officer/ First Aider at DPWH Laguna 2nd District Engineering Office