Dylan Kirchler

• Operations of Slew cranes (80t Lieber, 100t Tadano, 25 & 22t Franna).
• Transport of construction, mechanical and plant machinery using tilt tray truck from surface to underground
• Reading of plans to deliver rigging of structural, mechanical & piping components on the project
• Installation of crushers, transfer silos and shafts
• Was nominated as Health & Safety representative on site and actively involved in safety meetings and improving conditions around site.

Demobilisation and Construction Of Berth 2 Coal Ship Loading Facility

• Demobilisation of Ship Loader using cranes from 60T to 300T
• Dogging and Rigging from bumb barges and tugboats, dealing with tides and swells movements
• Involved as a HSR representative, talking with workers and management to overcome health and safety issues in a professional manner
• Working together with rigging and crane crew on heavy lift ship, lifting 2000T modules into position for new berth
• Performing rigging duties on Jack-Up Barges (IB 914 & SANTA FE)
• Assisting in Drilling, Piling and Grouting
• Helping with Barge moves, working in with tugboats, using mooring lines

Construction of Iron Ore Processing plant

• Install of Structural steel, mechanical components and piping
• Involved in technical lifts using equalising sheaves and following as per lift study
• (50 to 150t)
• Worked together as a crew to get the job done in a safely manner
• Structural plan reading, good set up of work area's
• VOC's of all plant and equipment

Design, construction and commissioning of the Lakeway Potash Project

• Install of structural steel, mechanical components and piping
• Dogging and Rigging of all size cranes from Franna to 350t cranes
• On site first aider, continued training and dummy exercise drills

Maintenance / Structural Integrity Project for the processing plant

• Rigging of beams, braces, girders, columns and other parts of the plant which need replacing
• Dogging, operating and rigging of slew cranes and franna
• Trained and Working under work permits and isolations
• Involved in toolbox and safety meetings to keep a safe work environment

Shutdown works Primary Crusher, Benefication plant, Shaker Screens

• Operating of 20T franna for all general lifts around site
• Dogging and Rigging 220t, 300t Liebher slew cranes
• Driving trucks, forklifts, telehandler and operating of EWP

Construction of 2 Coal Wash Plants

• Stick build and modular structural steel erection works
• Installation of all mechanical components (motors, pumps, valves, screens, shakers, hoppers, etc)
• Dogging and Rigging from 20T Franna to 350T Crawler
• Operating of 20/25T Franna, 80T Tadano slew crane
• Mobilise and Demobilise of Liebherr Crawler cranes from 100 to 1350T
• Installation of piping from small to big bore pipe
• Operations of EWP, telehandler and forklift

Upgrading and maintenance of CHPP

• Replacement of valves, pump and motors assisting fitters
• Removal of redundant flanged pipes and replacement with new ones
• Structural steel rigging and dogging of 25T Franna to 400T Slew Crane
• Operations of forklift, EWP, truck and 25T Franna
• Safe work practices and general shutdown duties
• Working under work permits, isolations for commissioning duties
• Structural plan reading, safe work practices and general construction duties

Rebuild and maintenance of a Dragline Crane (DRE 20)

• Dogging and rigging 20T Franna's, 80 & 150T Crawler's
• Setting up rigging gear to transfer from crane
• Install pinions, drive motors, gears, boom sections, wire ropes, valves and pumps
• Work together and liaise with BMA staff
• Operations of telehandler & EWP
• Working under work permits, isolations and conducting safe work practices

Construction of a stacker, reclaimer and conveyor systems

• Dogging 100, 250, 400T cranes and rigging of loads up to 100T
• Operations of EWP, Telehandler and forklift
• Contribute to team planning and safe execution of tasks
• Obtaining work permits and isolations if needed for the task
• Reading of structural plans

Construction of 50MW Solar Farms at Kidston & Collinsville

• Loading and unloading of containers, sorting of panels, torque tubes and everything logistical
• Operation of Pauselli 1200 & 900 Pile Driver and installation of over 200,000 piles
• Dogging and Rigging of solar arrays with 60T slew crane

• Dogging and rigging of franna's, tower cranes and slew cranes from 20T to 220T
• Loading and unloading of trucks with forklift or telehandler
• Contribute to team planning and execution of task safely
• Maintenance of cranes and rigging gear quarterly inspections
• Liaise with client in a professional manner to get the job done efficiently and safely

Scope

• Construction of a new LNG facility
• All SMP (Steel, Mechanical and Piping) works for propane compressor

Role

• Large and small bore pipe installations on gas train and pipe racks (up to approx
• 20 tonne and 33 metre lengths)
• Aligning and fitting pipe risers to compressors, spool movements for pipe fitters to complete line fit ups (lines up to 1800mm diameter)
• Dual crane lifts, dual lifts using cranes and chain blocks and load transfers from cranes to manual rigging gear
• Chain block and mechanical aid rigging movements of pipes and vessels
• Dogging 200T to 1200T crawlers, 70T roughies, 20T / 25T Franna
• Contribute to team planning and safe execution of tasks
• EWP operations (Up to 135ft) & Working @ Heights
• Confined space and restricted access work under permit
• ISO plan reading, safe work practices and general construction duties

Scope

• Construction of a new LNG Facility
• Piping crew responsible for all movements, install and fit up of large and small-bore pipe

Role

• Stick build and modular steel erection works
• Plan reading
• Dog 250T and 500T cranes
• Rigging and movement of pipes, blinds, steel, spades, actuators, valves, heads etc
• Completion and management and JHA's
• Other construction duties as required

Scope

• Expansion of Iron One Processing facility

Role

• Shutdown work on existing plant
• Modular and stick build steel erection, pipe installation, vessel installation, grid mesh installs and general crane dogging from 60T Mobile to 350T with super lift
• Gantry installations and flying fox constructions for tight space installs with no crane access
• Modify scaffolding for rigging installs and erection of scaffold access
• EWP operation (Up to 135T)
• Setting up and executing working @ heights tasks

Scope

• Construction of transfer stations, conveyor lines and train load out facility

Role

• Modular transfer station installation (160T), drive motors (32T), belt reels, GTU's and conveyor lines
• Dogging 20T crawler, 70T and 80T roughies, 20T Franna and dual lifts of trestle legs
• Steel erection, installations of components, pipe and manual rigging practices
• Contribute to team planning and execution of tasks
• EWP operations (Up to 135ft) & Working @ Heights
• Structural plan reading
• Safe work practices and general construction duties

Scope

• Construction of Iron Ore Processing Plant

Role

• Stick build erection, pipe & mechanical installations
• Install of wear plates on Ball Mills
• Operate EWP's (Up to 135FT)
• Structural plan reading
• Working @heights and confined space work
• Dogging 250T Crawler, 80T Slew crane & 20/25T Franna

Scope

• Maintenance, repairs & upgrades on existing plant

Role

• Rigging and movements of pipe, blinds, bundles, bundle pullers, spades, actuators, valves, heads etc
• Working @heights and confined Space work
• Operation of EWP's, Telehandler & 80T Slew Crane
• Site first Aider
• Inspection & Tagging & Maintenance of rigging gear
• Completion & Management of permits & JHA'S

Scope

• Construction of Handling plant, conveyor systems & transportation of modules ranging from 100T to 300T

Role

• Stick build and modular steel erection works
• Installation of gridmesh, apron feeders & shakers
• Working @Heights and confined space work
• Operation of EWP's (Up to 135FT)