Clofer Fernandez
Cebu City
Summary
Experienced pipe coating supervisor with expertise in a wide range of coating techniques and surface preparation methods. Proven ability to lead teams effectively, ensuring quality control and adherence to safety procedures. Skilled in equipment operation, material handling, and problem-solving, with a focus on achieving project goals efficiently. Strong communicator with a commitment to documentation and client satisfaction.
Overview
30
30
years of professional experience
Work History
On Job Training
CEBECO II
- Installation of primary and secondary lines
- Electrification in the remote mountain barangays
- Calibration of meter according to the standard of cooperatives
- Installation of kilowatt hour meters
- Take action whenever there are complaints of power failure/power interruptions
- Checking up of cut outs and power distribution transformer
- Surveying and estimate the location and number of materials to be used.
Engineering Information Analyst
Innodata Philippines, Inc.
11.2000
- Encoding the materials name, trademark, quality mark, voltage of electrical Brands and types.
Crew Supervisor
Aegion Coating Services Middle East
12.2014 - 12.2023
- Oversee internal and external field joint coating crews
- Direct and communicate with the Technicians/ Blast Operator/ Coating Applicators
- Communicate and liaise with the Contractor/ Company representative (Quality & Construction) on-site as needed and as applicable
- Prepare necessary documents including, Daily Supervisors Report, and Daily progress reports
- Maintain equipment spare inventory and order spares equipment and perform general equipment maintenance
- To ensure Safety Requirements for the Coating Application in accordance with approved procedures
- Ensure the proper handling/ storage requirements of coating materials.
Instrument technician (Calibration, Precom/Commissioning)
Consolidated Contractors Company
07.2012 - 03.2014
- Bench Calibration of Different Types of Transmitter such as Pressure, Temperature, Flow and Level by HART PROTOCOL
- Calibration of Control Valves and Emergency Shutdown Valve including valve seat leakage test as per Quality Control Procedure
- Calibration of Pressure Gauges using Dead Weight Tester
- Assist Pre-commissioning Engineer and Vendor Service Engineer in conducting Site Acceptance Test
- Involved in Insulation and Resistance Test of Primary and Secondary Cable
- Lead the team in conducting signal cable continuity test from field, Junction Boxes, Marshalling Panel to System Cabinet
- Coordinate with the electrical team in energizing the marshaling and System Cabinet
- Loop Checking of instrument from Field to Distributed Control System
- Rectify, Resetting and Recalibrate field instrument as per process function, graphics and Alarm
- Functional test of Vibration transmitter (Axial, Radial, Key Phasor) using TK3E Bentley Nevada
- Functional Test of Control Valves and Verify the DCS indication & Field indication with accordance of Datasheets
- Functional Test of ESD Valves and Verify the limit switch feedback in the DCS
- Functional Test of Gas Detectors (Toxic, Hydro-carbon, Hydrogen, Methane,)
- Loop testing of Motor Loops prior conducting the Motor Solo Run test
- Involved in Interlocking Trip test and Cause & Effect activities
- Involved in Control Narratives
- Pre-commissioned/Commissioned various vendor skids equipment such as Claus Air Blower, Thermal Oxidizer Fan, Air Pre-heater, Lean Amine Pump and Chemical Injection Packages
- Appoint by Client as a Boardman during Loop Checking using Honeywell Experion with CS 300 Controller.
Charge-hand Instrument (Construction, Pre-com/Commissioning)
Consolidated Contract Engineering and Procurement S.A.L Offshore
11.2011 - 05.2012
- Instructing the work team the right place of work, the right materials to be used and the priority of the client which is to follow the golden rule
- Planning, scheduling and coordinating with the foreman/supervisor for the next (job/work) scope of work
- Supervising the work place and check if the skilled personnel are working in with the quality standard of work
- Assess the working place for any risk and provide the right preventive measures
- Checking of all instruments and equipment JB Panel/Cable tray if it is equipped with the quality standard are ready for RFI
- Installation of all telecommunication equipment
- Cable glanding/termination of all telecommunication equipment
- Cable glanding/termination of all heat tracing JB/Panel
- Cable glanding/termination of all fire/gas equipment
- Closed monitoring of daily activities as per schedules
- Lead the team in Signal Cable Continuity test prior for electrical power energization activities with the witness of the AGIP personnel
- Coordinate with the AGIP Client representative for instrument site inspection and sign off the Inspection and Test Reports
- Lead the team in loop checking prior to loop test of the following scope of works
- F&G system include addressable detectors, fire water deluge system
- Perform extensive loop testing, verify operating data against to DCS for correct loops function, graphics and configuration alarms and setting points in accordance base control specification.
Electro-Mechanical Supervisor
Iman .Co. - Saudi Telephone Company (STC Project)
11.2007 - 11.2010
- Responding to all alarms n the Electronic Cabinet, Exchange and all STC Building 24/7
- Time scheduling for all Electro-Mechanical equipment for preventive maintenance
- Installation of new fire alarms in the building
- Manage technicians and implementing safety measures in the job site
- Installation and troubleshooting of all types of air-conditioning units
- Giving a working schedule for each team so they can cope their work
- Checking all new installed electronic cabinet in field and check the alarms if it coincide to the DCS operator
- Commission the new fire alarm system in building with the accordance to their respective location
- Close monitoring all standby generator and fire pumps generator
- Preventive and predictive maintenance in all electrical and instrumentation system
- Attending all kinds of alarms that the DCS operator told and the location of the cabinet/exchange/stc building
- Site acceptance of all electronic cabinet together with the vendor and building/site engineer
- Set a schedule for all equipment for their preventive maintenance
- Discuss all important things to achieve the performance of the system and the cause and effect.
Facilities in Charge Engineer
Phoenix-Sibs Publishing House, Inc.
08.2007 - 09.2007
- Managed all the equipment/facilities in the company premises
- Responsible for the schedule of work for labor personnel
- Managed the outgoing/incoming materials in the company
- In charge of the installation of PBX and all electrical/electronic, computer devices
- In charge of the safety measure of the working force and make sure that all fire equipment is visible to the place.
Electrical and Aircon Technician
Judah Reproduction, Inc.
05.1998 - 10.2000
- Troubleshooting and maintaining all air-conditioning units
- Cleaning all condenser everyday
- Repair and recondition of magnetic conductor
- Scheduling the day and time when cleaning the evaporator and repair
- Wiring of 3 phase electrical motors and motor controls
- Installation of electrical panel board, safety boxes, electrical lighting/outlet
- Troubleshooting of all electrical equipment/motors
- Responsible of installing new motor controls wiring.
PDI -JR . Installer
ETSI Technology A.G. Siemens
06.1997 - 03.1998
- Installation of Telecommunications Container Van (for Islacom)
- Installation of ESWD (Digital Electronic Switching System)
- Installation of DLU (Digital Line Unit)
- Installation of MDF (Main Distribution Frame)
- Installation of FDC Unit Installation of MDP (Main Distribution Panel) Type: D400 1200-GFC NV200 for Container
- Installation of SVE 40
- Installation of Rectifier Supply
- Installation of Emergency Light, Outlet, Aircon, De-modifier
- Installation of smoke detector
- Installation of DRS 1X155/6.8 GHZ, DRS 1X155/4.7 GHz, CTR 190/7 GHZ SMA 1 Rel
- 2 system
- Installation of SMA in San Isidro, Leyte and Installation of Pig Tails (Fiber Optic Wires)
- Fabrication of Signaling Wire
- Installation of Power Supply to the System
- Installation of NT 2000 of Fujitsu Project in RCPI Bayan Tel Building.
Electrician
Gaw Trading, Inc.
10.1994 - 02.1997
- Installation of Electrical Lights and Lines
- Repair and Installation of Intercom, PABX, Telecom System
- Transferring and Load Balancing
- Responsible for Maintaining All Electrical Motor/Equipment.
Electrical Technician
Royal Concourse
06.1994 - 08.1994
- Installation of electrical devices
- Troubleshooting and repair motors
- Installation of additional telephone lines
- Installation and repair of audio/video equipment
- Installation of cable tray
- Operate and maintain the generator set
- Apply preventive maintenance of generator set
Electrical Technician
Sigmarine Industries
04.1994 - 06.1994
- Installation of Electrical wiring in Marine Vessels
- Installation of generator sets
- Troubleshooting and repair of all kinds of motor especially generator sets Installation of motor controller
- Applying preventive maintenance of all electrical motors and controls.
Education
Bachelor of Science - Electrical Engineering
University of Cebu
Sanciangko Street Cebu City 04.2001 -
Skills
Coating Techniques: Expertise in various pipe coating methods, such as fusion-bonded epoxy (FBE), polyethylene (PE), or epoxy powder coating
Certificates And Training
- Trained in the use and administration of ACS proprietary equipment:
- Induction heating equipment and FBE coating application equipment for external field joint coating application.
- 8"- 48" Internal Liquid Epoxy and FBE Cleaning, Coating, and Inspection Robotic field joint coating equipment.
- Received CRTS Level 3 Internal and External Coating Technician accreditation
- Saudi Aramco Coating Applicator Certification Qualified per SAEP 316 to perform the duties of:
- Crew Supervisor
- Abrasive blaster (custom and robotic)
- Coating Applicator
- Type of coating qualified - APCS 102,104,117/120
- Certified by KCC to apply FBE Powder coatings.
References
- Engr. AGUSTINE AVILINO
- Pre-Commissioning Engineer South Yoleten Gas Project Turkmenistan.
- Engr. HILAL SAAB
- C.C.C. Instrument Engineer Caspian Sea, Riser Island, Kazakhstan
- DR. NOLASCO K. MALABAGO
- Dean, College of Engineering. Cebu Technological University-Main Campus. M.J. Cuenco Avenue Corner R. Palma.
Timeline
Crew Supervisor
Aegion Coating Services Middle East
12.2014 - 12.2023
Instrument technician (Calibration, Precom/Commissioning)
Consolidated Contractors Company
07.2012 - 03.2014
Charge-hand Instrument (Construction, Pre-com/Commissioning)
Consolidated Contract Engineering and Procurement S.A.L Offshore
11.2011 - 05.2012
Electro-Mechanical Supervisor
Iman .Co. - Saudi Telephone Company (STC Project)
11.2007 - 11.2010
Facilities in Charge Engineer
Phoenix-Sibs Publishing House, Inc.
08.2007 - 09.2007
Bachelor of Science - Electrical Engineering
University of Cebu
04.2001 -
Engineering Information Analyst
Innodata Philippines, Inc.
11.2000
Electrical and Aircon Technician
Judah Reproduction, Inc.
05.1998 - 10.2000
PDI -JR . Installer
ETSI Technology A.G. Siemens
06.1997 - 03.1998
Electrician
Gaw Trading, Inc.
10.1994 - 02.1997
Electrical Technician
Royal Concourse
06.1994 - 08.1994
Electrical Technician
Sigmarine Industries
04.1994 - 06.1994
On Job Training
CEBECO II
Similar Profiles
Hugo TapiaHugo Tapia
Physiotherapist at CESFAM Reina Isabel II ( Queen Elizabeth II Family Medical Center )Physiotherapist at CESFAM Reina Isabel II ( Queen Elizabeth II Family Medical Center )
Annette BlevinsAnnette Blevins
Account Manager at RCM Specialist IIAccount Manager at RCM Specialist II
Thiik KuotThiik Kuot
Student Council Treasurer at John Paul II Secondary SchoolStudent Council Treasurer at John Paul II Secondary School