Bernard Allan Soriano

• Conducted preventive maintenance on equipment.
• Installed new equipment and modified existing equipment.
• Implemented advanced diagnostic tools to resolve customer complaints.
• Coordinated digging and climbing permits.

. Trouble Shooting Main Power Supply on Panel board

.Operating 2 Generator Set

• Reviewed blueprints and schematics to properly place wires, fixtures and appliances.
• Used oscilloscopes, voltmeters and ohmmeters to test electrical systems.
• Audited supply inventories.
• Inspected electrical equipment to assure it was operating correctly.
• Responded to fault and wiring issues, identifying hazards and problems.
• Safely installed new electrical components, fixtures and motors in addition to testing systems to enhance power flow.
• Followed state and local building regulations based on National Electrical Code.
• Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
• Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
• Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
• Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
• Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.
• Replaced and repaired lighting fixtures and electrical control and distribution equipment.
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
• Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
• Examined electrical units for loose connections and broken insulation.
• Spliced, joined and connected wire to fixtures and other electrical components.
• Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
• Fabricated custom and replacement parts according to specifications, using hand tools.
• Installed 120/208 volt systems and 347/600 volt systems.
• Instructed customers on proper use and safety of electrical systems and equipment.
• Troubleshot and repaired malfunctioning systems and components.
• Studied building schematics to determine location of wiring and equipment.
• Managed business report generation, recordkeeping and supply ordering.

. Operating 5 Generator set

. Trouble Shooting of loose Power Supply of all tenants

.Operating Chillers 1000 tr 500 tr

. Installing different kind of Breakers lights,outlets,swicth

. Always Checking wiring Terminal on EE ROOMS if loose or hot while using thermal scanner

• Conducted preventive maintenance on equipment.
• Installed new equipment and modified existing equipment.
• Implemented advanced diagnostic tools to resolve customer complaints.
• Coordinated digging and climbing permits.
• Reviewed blueprints and schematics to properly place wires, fixtures and appliances.
• Used oscilloscopes, voltmeters and ohmmeters to test electrical systems.
• Audited supply inventories.
• Inspected electrical equipment to assure it was operating correctly.
• Responded to fault and wiring issues, identifying hazards and problems.
• Safely installed new electrical components, fixtures and motors in addition to testing systems to enhance power flow.
• Followed state and local building regulations based on National Electrical Code.
• Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
• Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
• Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
• Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
• Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.
• Replaced and repaired lighting fixtures and electrical control and distribution equipment.
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
• Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
• Examined electrical units for loose connections and broken insulation.
• Spliced, joined and connected wire to fixtures and other electrical components.
• Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
• Fabricated custom and replacement parts according to specifications, using hand tools.
• Installed 120/208 volt systems and 347/600 volt systems.
• Instructed customers on proper use and safety of electrical systems and equipment.
• Troubleshot and repaired malfunctioning systems and components.
• Studied building schematics to determine location of wiring and equipment.
• Managed business report generation, recordkeeping and supply ordering.

• Proposed electrical product and system modifications to improve quality and efficiency.
• Performed maintenance procedures and repairs on existing electrical products and systems.
• Provided on-site engineering and technical services during installation and fielding processes.
• Validated product and subsystem performance through simulation and laboratory testing.
• Evaluated electrical installations and systems to isolate faults and implement corrective actions.
• Completed in-depth performance tests of parts and systems undergoing design optimization in simulated environments.
• Reviewed engineering design proposals and completed drawings to determine feasibility of each plan.
• Regularly operated logic and spectrum analyzers, frequency counters, oscilloscopes, and other technical equipment.
• Wrote authoritative engineering specifications to clear up avoid confusing in field regarding design parameters or functions.
• Rethought plans for each design to devise lateral options filling unique market gaps.
• Created, aligned, and optimized electrical instrumentation and testing equipment.
• Evaluated power needs for various systems.
• Mentored junior engineers and new hires in job-specific tasks and application of electrical processes.
• Supervised construction and pre-commissioning of electrical rooms and substations.
• Used established formulae to calculate current loads and short circuit currents.
• Calibrated and repaired existing systems to maintain functionality.
• Developed engineering documentation detailing system requirements and diagnostic procedures.
• Reduced electrical construction hazards with upgraded safety policies and stringent enforcement.
• Inspected and performed validation testing for designed systems and third-party installations.
• Read and analyzed blueprints and project documentation to develop workflows and strategy.
• Performed in-depth electrical acceptance testing of completed hardware.
• Estimated project costs and resource allocation to forecast budget requirements and monitor adherence.
• Administered both energized and de-energized testing on multi-design change packages.
• Identified specific cables, fuses and circuit breakers required for assigned installations.
• Verified viability and compliance for systems and circuits.
• Monitored manufacturing operations of electrical devices for compliance with safety protocols.
• Inspected completed installations to observe operations and verify conformance to design and equipment specifications.